Lancia Beta Forum
March 28, 2024, 08:30:49 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: 2024 Events Calendar http://www.betaboyz.myzen.co.uk/forum/index.php?board=92.0
Please feel free to add more.
 
   Home   Help Contact Admin Search Calendar Gallery Articles Login Register  
Pages: [1]
  Print  
Author Topic: Leaded or unleaded?  (Read 7838 times)
0 Members and 1 Guest are viewing this topic.
droptop
Hero Member
*****
Offline Offline

Ireland, Republic of Ireland, Republic of

Posts: 701



« on: May 01, 2010, 05:16:31 AM »

 Huh? Greetings from the "Early One". Just wondering, I have bought my first Beta. Its a 1977 (ish) spider 2000 and I am in the process of servicing it and overhauling cooling, braking and electrical systems, but I don't know if I need to use a lead additive and/or an octane booster. The car has 33,000 miles on the clock which appears to be genuine and hasn't been ran for more than a couple of hours since unleaded was introduced in Ireland so little chance of damage been done if it can't take it. Can anyone advise me? I don't want to get the head modified until it needs an overhaul as I am looking forward to driving it soon.
Logged

Rust never sleeps
MattNoVAT
Administrator
Legendary Member
******
Offline Offline

France France

Posts: 1830



« Reply #1 on: May 01, 2010, 07:08:33 PM »

When I took my car to an old school tuner who has his own rolling road I asked this very question as I wanted my carb set up for more modern fuels.  He advised me that it is fine to run these cars/engines on 98 RON fuel, he recommended either Shell V Power or BP Optimax, because of the octane rating and the low sulphur content.  There are supermarket fuels that have 99 RON but he advised that the sulphur content was higher.

Then he said that if you add Lead additive like Millers VSP he said "your car will think all its birthdays have come at once".   

http://cgi.ebay.co.uk/Millers-Oils-VSP-lead-replacement-fuel-octane-petrol-/360081474837?cmd=ViewItem&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item53d6874515#ht_1433wt_1422

So, I run my Coupe on Shell V-Power and Millers VSP and I think that it is probably the best its ever run.

I have also heard that if you can get hold of Tetraboost, this is pretty similar to Millers VSP but works out cheaper in the long run, but you have to buy it in bulk and its about £100.
Logged

1981 2000 Coupe S2/FL
1976 1600 Coupe S1
2007 Ypsilon 1.3 Bi-Colori
thecolonel
Guest
« Reply #2 on: May 01, 2010, 09:04:29 PM »

when four start was first invented there was a choice of lead or Castrol formula, lead was cheaper.
Tetraboost is basically the equivalent of lead but it's very dangerous if you buy it you're
advised to get someone else to mix it for you.

Geoff
Logged
thecolonel
Guest
« Reply #3 on: May 02, 2010, 12:22:21 PM »

When they first said about removing 4 star I went to my local engineering company
and asked about valves/seats, his comments were " so you want us to remove steel
seats and replace them with steel seats, not a lot of point really, most problems
with unleaded are down to timing " his suggestion was to run the car on unleaded
for 3 k miles and then check the clearances, if there was a problem then he would
change the seats, 5 cars and umpteen thouusands of miles later I'm still running
on normal unleaded with the odd tank of super, no problems as yet, although I did
have to retard the timing a bit.

Geoff (sensible head on)
Logged
75coupe
Hero Member
*****
Offline Offline

Posts: 298

1975 Beta coupe 2L


« Reply #4 on: May 28, 2011, 10:49:52 PM »

I too run standard valves/seats, never used additives, just 98 Ron unleaded either Shell V power or BP Ultimate. My car has nearly 11:1 compression, revs to 7000+ and more power than stock had no problems (so far!!!!!)
Logged
andybeta
Full Member
***
Offline Offline

Posts: 81


« Reply #5 on: June 29, 2011, 07:04:00 AM »

Just to clarify Optimax is Shell. When I was running mine I used this and it markedly increased the power and responsiveness of the engine. Unleaded is 95RON and frankly not enough octane so engine felt flat and down on power. I used Optimax with Millers Octane Booster (maybe VSP before it was withdrawn I suspect because some of the ingredients weren't too nice) a few times and it dramatically improved engine power and responsiveness. The combination must have easily been 100 octane - rocket fuel. No problems with excessive valve seat wear. I think the main issue is reduced octane of unleaded.
Logged
lukasdeopalenica
Hero Member
*****
Offline Offline

Australia Australia

Posts: 497



« Reply #6 on: January 31, 2013, 12:49:29 PM »

I know this is an old thread, but because I have not found a satisfying answer for my doubts I am renewing the question here. Are the betas, especially late models, unleaded fuel compatible or should we use lead additives? Many of you have run your betas for such a long period, so you have your own opinions.
Logged

Lancia Beta HPE 2000i.e. '82 rosso corsa
SAAB 900i 16V Aero, '93 solid black
Subaru Outback 3.0R
Honda CB125 K6 '76 electric blue
Specialized Epic & Stumpjumper
Hawk
Hero Member
*****
Offline Offline

England England

Posts: 448



« Reply #7 on: January 31, 2013, 01:10:20 PM »

I run mine on 'super' unleaded (98 ron) with a bottle of Millers VSP every 5 fills or so - I bought a job lot and still have about 15 bottles left. 

I did try running on 95 ron + a bottle of Millers every fill but that worked our expensive (Millers is £10 a bottle) and it seemed to respond better to 98 ron. 

Never had any problems using unleaded
Logged
Ammy
Sr. Member
****
Offline Offline

United Kingdom United Kingdom

Posts: 176


« Reply #8 on: January 31, 2013, 03:18:31 PM »

I also took my 2000 Spyder to my local engineering specialist in 2009 and got exactly the same response as  Geoff in 2010. This suggests there  must be , at least,  two "honest" engineering companies in U.K. not wanting to take customers "for a ride". I only do about 1500 miles a year but have had no problem with unleaded.
Logged
Neil-yaj396
Legendary Member
******
Offline Offline

Posts: 1885


1979 1300 Coupe


« Reply #9 on: February 01, 2013, 03:58:37 PM »

23000 miles mostly on normal unleaded plus the odd tank of super. No problems whatsoever.
Logged
hf_dave
Jr. Member
**
Offline Offline

Posts: 15


« Reply #10 on: February 04, 2013, 10:01:04 PM »

I believe there is no problem running on un-leaded , There was an article in a car magazine a couple of years ago about a beta that had been run on un-leaded only for a couple of years and there was no sign of valve seat recession.  In recent articles  I read about aluminium headed cars fitted with steel valve seats and they reckoned that the seats were hard enough . I will wait and see how my beta gets on with  un-leaded.  Smiley Thanks. David.
Logged
explorerr
Newbie
*
Offline Offline

Posts: 5


« Reply #11 on: February 07, 2013, 05:06:55 PM »

i use unleaded 3 years in my beta 1300.no problem.
Logged
betaveloce
Sr. Member
****
Offline Offline

Belgium Belgium

Posts: 163



« Reply #12 on: February 12, 2013, 02:40:13 PM »

unleaded here as well
Logged

Beta Coupé 1.8 '74
Beta Spider 1.6 '80
Beta HPE 2.0 i.e. '82
Delta Integrale 8V '88
Ypsilon 1.4 16V '09
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SMFAds for Free Forums
Valid XHTML 1.0! Valid CSS!