Lancia Beta Forum
December 02, 2021, 10:41:09 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: NEC Classic Car Show 12th-14th November 2021
http://www.betaboyz.myzen.co.uk/forum/index.php?topic=4420.0
 
   Home   Help Contact Admin Search Calendar Gallery Articles Login Register  
Pages: [1]
  Print  
Author Topic: Cylinder block coolant drain plug.  (Read 508 times)
0 Members and 1 Guest are viewing this topic.
mangocrazy
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1076


« on: March 12, 2021, 06:46:16 PM »

As I was looking through the Haynes manual for guidance (always a dangerous thing, I know) I noticed a reference to the cylinder block drain plug. It's located in the centre of the block, at the back of the engine, below the core plugs. I established through trial and error that the hread pitch into which the plug screws is M10 x 1.0. Are these plugs generally available or is it simply a case of finding a suitable sized bolt to plug the hole?
Logged

1980 Lancia Beta Spider 2000 (S2FL)
2002 VW Transporter T4
2017 KTM Duke 690R
2008 Aprilia SL1000 Falco
1992 Ducati 888 SP3
1988 Honda VFR750F
1980 Yamaha RD350LC
WestonE
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1422


« Reply #1 on: March 13, 2021, 03:27:23 PM »

Hi Graham

Find a used one, wire brush it and get it plated. I think they are a tapered thread to promote the seal so not as simple as swapping in a bolt in a rare metric fine pitch!

Eric
Logged
mangocrazy
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1076


« Reply #2 on: March 13, 2021, 05:22:29 PM »

Cheers Eric, using a taper thread fits with what I observed, as there doesn't seem to be any flat surface that a crush washer could seat to. Plating and PTFE tape, I think.

It's also in a particularly inaccessible location when in the car. What fun...
Logged

1980 Lancia Beta Spider 2000 (S2FL)
2002 VW Transporter T4
2017 KTM Duke 690R
2008 Aprilia SL1000 Falco
1992 Ducati 888 SP3
1988 Honda VFR750F
1980 Yamaha RD350LC
WestonE
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1422


« Reply #3 on: March 13, 2021, 06:29:14 PM »

Hi Graham

I small amount of copper slip NO PTFE tape.

Eric
Logged
mangocrazy
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1076


« Reply #4 on: March 13, 2021, 07:10:31 PM »

Hi Eric,

Thanks for that word of warning. In that case I assume seizure is more of a problem than leakage...

Graham
Logged

1980 Lancia Beta Spider 2000 (S2FL)
2002 VW Transporter T4
2017 KTM Duke 690R
2008 Aprilia SL1000 Falco
1992 Ducati 888 SP3
1988 Honda VFR750F
1980 Yamaha RD350LC
WestonE
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1422


« Reply #5 on: March 14, 2021, 09:25:49 AM »

Hi Graham

Yes
Logged
mangocrazy
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1076


« Reply #6 on: March 15, 2021, 12:46:49 PM »

I believe I may have found an inexpensive component that would perform this particular job at least as well as the no longer available Fiat/Lancia part. It's from a UK company called Automotion Components and the part is a hexagon socket blanking plug with tapered thread. The part is available in a variety of materials; steel (self colour and zinc plated), stainless steel (A2 and A4) and brass. My preference would be for the A4 stainless (316 marine grade) due to its superior corrosion resistance propertirs.

These are available for the princely sum of 85 pence each in Metric fine (M10 x 1.0) thread pitch. There is a small order charge (3.50) for orders under 30, but their product range is so large that I'm sure I can find other parts that I need (want) to make up the order to the required amount. This is a screenshot of the catalogue page for the part I'm referring to, and here is the link to their mechanical components catalogue:

https://www.automotioncomponents.co.uk/media/files/catalogue/Mechanical_Components_Handbook_2018.pdf



* M10 blanking plug.JPG (150.17 KB, 1160x999 - viewed 77 times.)
« Last Edit: March 15, 2021, 12:50:15 PM by mangocrazy » Logged

1980 Lancia Beta Spider 2000 (S2FL)
2002 VW Transporter T4
2017 KTM Duke 690R
2008 Aprilia SL1000 Falco
1992 Ducati 888 SP3
1988 Honda VFR750F
1980 Yamaha RD350LC
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SMFAds for Free Forums
Valid XHTML 1.0! Valid CSS!