Lancia Beta Forum
March 29, 2024, 06:54:40 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: NEC Restoration Show 22nd-24th March 2024
http://www.betaboyz.myzen.co.uk/forum/index.php?topic=5015.msg36852#msg36852
 
   Home   Help Contact Admin Search Calendar Gallery Articles Login Register  
Pages: [1]
  Print  
Author Topic: Pistons  (Read 7615 times)
0 Members and 1 Guest are viewing this topic.
mwredit
Full Member
***
Offline Offline

United States United States

Posts: 80



« on: October 12, 2017, 02:02:16 AM »

I will need to do a rebore on my 1800 due to scoring in cylinder #4 under closer inspection.  I will be in the market in the near future for some oversize pistons.  However, upon looking around on the internet, I have found a few different ones priced from $180 up to $600.  The $180 ones are from Vick Auto Sports in Texas, claim to be OEM supplied, like a lot of the others I've seen.  I prefer to get them here in the US, but will compromise.  What have your experiences been?  Thoughts?
Logged

Mike R.

1968 Mercury Cougar XR7
1961 MG Midget
1974 Ford Mustang II Ghia
1977 Lancia Beta HPE
mangocrazy
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1347


Graham Stewart


« Reply #1 on: October 12, 2017, 09:48:45 AM »

Hi. I'm in the (lengthy) process of doing a complete engine rebuild of my 2000 Spider and I'm using Vick Auto's (claimed) 10:1 compression pistons. To be honest, when buying new off the shelf items there are precious few options that I'm aware of. Guy Croft has forged pistons to his own design, but the price is simply too rich for my blood. I think quite a few posters on here have used VAS pistons, and don't recall hearing any complaints.
Logged

1980 Lancia Beta Spider 2000 (S2FL)
2002 VW Transporter T4
2017 KTM Duke 690R
2008 Aprilia SL1000 Falco
1992 Ducati 888 SP3
1988 Honda VFR750F
1980 Yamaha RD350LC
mwredit
Full Member
***
Offline Offline

United States United States

Posts: 80



« Reply #2 on: October 12, 2017, 07:17:47 PM »

mangocrazy- Thanks, I was also looking into the VAS pistons.  Auto Ricambi also has some that look good too.  I'm not looking to build a race engine, just stock mainly for smog reasons, so I'm looking for the basic, stock compression type.  My budget doesnt allow for the forged type, and that is overkill especially since I'm not running any "Go Fast, Make Noise" stuff at all.  I'd just slap rings and rehone, but the scoring is enough to catch your fingernails and I believe the honing wouldnt take it out.  The Guy Croft stuff is great, but too rich for my blood too.  I figure since the stock stuff lasted this long, it should be good for another 20-30 years.
Logged

Mike R.

1968 Mercury Cougar XR7
1961 MG Midget
1974 Ford Mustang II Ghia
1977 Lancia Beta HPE
jreacock
Sr. Member
****
Offline Offline

England England

Posts: 124


« Reply #3 on: October 13, 2017, 10:06:51 PM »

Guy recommended the VAS pistons to me - because I wasn't after anything more than standard.
Logged

69 Fulvia 1.6HF S1
71 Works Fulvia 1.6HF
75 Gp4 Stratos HF
81 Beta Spyder 2.0
82 037 Rally stradale
mwredit
Full Member
***
Offline Offline

United States United States

Posts: 80



« Reply #4 on: October 14, 2017, 01:40:53 AM »

jreacock- Me neither.  Bone stock is what I'm looking for.  As long as they aren't Chinese, I'll be good with it.
Logged

Mike R.

1968 Mercury Cougar XR7
1961 MG Midget
1974 Ford Mustang II Ghia
1977 Lancia Beta HPE
Deltona
Jr. Member
**
Offline Offline

United Kingdom United Kingdom

Posts: 13


« Reply #5 on: November 20, 2017, 09:06:50 PM »

Who are VAS pistons? A quick Google has thrown up nothing....
Logged
mangocrazy
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1347


Graham Stewart


« Reply #6 on: November 20, 2017, 10:43:32 PM »

Vick Auto Sports - based in Texas, I think...

http://www.vickauto.com/newstore/index.php?main_page=product_info&cPath=10_17_116&products_id=4032
« Last Edit: November 20, 2017, 10:49:33 PM by mangocrazy » Logged

1980 Lancia Beta Spider 2000 (S2FL)
2002 VW Transporter T4
2017 KTM Duke 690R
2008 Aprilia SL1000 Falco
1992 Ducati 888 SP3
1988 Honda VFR750F
1980 Yamaha RD350LC
Deltona
Jr. Member
**
Offline Offline

United Kingdom United Kingdom

Posts: 13


« Reply #7 on: November 21, 2017, 04:35:51 PM »

I see, thank you. What other people make them for the Fiat TC beside them and GC? I saw some chap flogging them on Ebay in Europe a while ago, but don't know much about them.
Logged
mangocrazy
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1347


Graham Stewart


« Reply #8 on: November 21, 2017, 04:41:05 PM »

I'm not aware of any others that are reasonably priced. Guy Croft sells forged pistons to his own design, but they are priced accordingly. I don't believe that Fiat/Lancia  can supply them new, and other European specialist piston makers would be similarly priced to those GC sells. There really just aren't that many options.
Logged

1980 Lancia Beta Spider 2000 (S2FL)
2002 VW Transporter T4
2017 KTM Duke 690R
2008 Aprilia SL1000 Falco
1992 Ducati 888 SP3
1988 Honda VFR750F
1980 Yamaha RD350LC
Deltona
Jr. Member
**
Offline Offline

United Kingdom United Kingdom

Posts: 13


« Reply #9 on: November 22, 2017, 07:50:06 PM »

There are these: http://www.ebay.co.uk/itm/Kolbensatz-Fiat-124-Sport-Spider-Beta-131-High-Compression-Piston-Set-84-60/292306303577?hash=item440ed03a59:g:8bcAAOSwEWdZ0lgh

God knows what quality though at that price.

Then there's these: http://www.ebay.co.uk/itm/SUPERTECH-Forged-Pistons-Fiat-Abarth-Spider-131-132-Twin-Cam-1-8-2-0-8-v/272492185613?hash=item3f71ccc80d:g:QKEAAOSwnHZYWSDP
Logged
mangocrazy
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1347


Graham Stewart


« Reply #10 on: November 22, 2017, 09:49:16 PM »

I'd like to know the (nominal) CR of the cast set. They certainly look to be higher CR than standard. The VAS pistons are cheaper, but shipping from the USA will add substantially to the ticket price. The German set may not be that far away in price once shipping is factored in. The forged pistons from the Polish site look very nice, but Supertech isn't a name I recognise...
Logged

1980 Lancia Beta Spider 2000 (S2FL)
2002 VW Transporter T4
2017 KTM Duke 690R
2008 Aprilia SL1000 Falco
1992 Ducati 888 SP3
1988 Honda VFR750F
1980 Yamaha RD350LC
peteracs
Administrator
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 3822


Peter Stokes


« Reply #11 on: November 22, 2017, 11:17:46 PM »

Hi Graham

Do not forget you will also be charged VAT @ 20% on items from the US.

Peter
Logged

Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600
Neil-yaj396
Legendary Member
******
Offline Offline

Posts: 1885


1979 1300 Coupe


« Reply #12 on: November 23, 2017, 07:48:08 AM »

Hi Graham

Do not forget you will also be charged VAT @ 20% on items from the US.

Peter

....and possibly Customs duty?
Logged
Deltona
Jr. Member
**
Offline Offline

United Kingdom United Kingdom

Posts: 13


« Reply #13 on: November 23, 2017, 01:18:56 PM »

I'd like to know the (nominal) CR of the cast set. They certainly look to be higher CR than standard. The VAS pistons are cheaper, but shipping from the USA will add substantially to the ticket price. The German set may not be that far away in price once shipping is factored in. The forged pistons from the Polish site look very nice, but Supertech isn't a name I recognise...

There isn't one as all combustion chambers, gasket and head thicknesses are different. They are basically a one-size-fits-all piston because if the dome is solid you simply mount it in the lathe and turn it down until you reach your target CR (or leave as-is), but's it's likely somewhere around 11 or 12-1 at that.

Back when the pound was stronger it was a very rough rule of thumb that if something was $500 it would cost you around £500 by the time you got it in your hands.

Looking 'nice' (sic) is no measure of a pistons quality or competence to do the job. Supertech have been making high quality engine components for years, mainly valves, but have recently branched out into other areas.
Logged
mangocrazy
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1347


Graham Stewart


« Reply #14 on: November 23, 2017, 07:16:40 PM »

That's what I meant by 'nominal' CR; i.e. before they've been molested. Are you sure the dome is solid, or just hoping? If it is solid the pistons will weigh a fair bit.

I'm well aware of the markup you face trying to import stuff into the UK from the US. I brought all my US-sourced stuff back as hold luggage when we went over a couple of years back. I shudder to think what the cost would have been otherwise.

OK, let's replace 'nice' with 'not crap', if you prefer. It was meant as a mark of approval. They appear worth the money being asked.
Logged

1980 Lancia Beta Spider 2000 (S2FL)
2002 VW Transporter T4
2017 KTM Duke 690R
2008 Aprilia SL1000 Falco
1992 Ducati 888 SP3
1988 Honda VFR750F
1980 Yamaha RD350LC
Deltona
Jr. Member
**
Offline Offline

United Kingdom United Kingdom

Posts: 13


« Reply #15 on: November 23, 2017, 11:44:01 PM »

I'm presuming about the dome, i'm sure the vendor would would give a more accurate answer!
You win and lose with a big dome like that, the flame front can't travel across the combustion chamber making it more prone to det' and lose some of the increase which was had by the higher CR.
Sorry, that was my old English Language teacher speaking there (the old stick) he advised me the word 'nice' had so little meaning that it had no place in the English language, he was right in a way, I remember looking in a dictionary at the time and it wasn't even in there.  Cheesy
Logged
mangocrazy
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1347


Graham Stewart


« Reply #16 on: November 24, 2017, 11:40:11 PM »

Sorry, that was my old English Language teacher speaking there (the old stick) he advised me the word 'nice' had so little meaning that it had no place in the English language, he was right in a way, I remember looking in a dictionary at the time and it wasn't even in there.  Cheesy
We either had the same English teacher or they had both been schooled similarly, because my EL teacher had a similar antipathy to the word 'nice' (or more to the point its over-use). I seem to recall that it originally meant clever or accurate (as in a nice distinction), but over-use has rendered it essentially meaningless.
Logged

1980 Lancia Beta Spider 2000 (S2FL)
2002 VW Transporter T4
2017 KTM Duke 690R
2008 Aprilia SL1000 Falco
1992 Ducati 888 SP3
1988 Honda VFR750F
1980 Yamaha RD350LC
Deltona
Jr. Member
**
Offline Offline

United Kingdom United Kingdom

Posts: 13


« Reply #17 on: November 28, 2017, 03:19:12 PM »

Sorry, that was my old English Language teacher speaking there (the old stick) he advised me the word 'nice' had so little meaning that it had no place in the English language, he was right in a way, I remember looking in a dictionary at the time and it wasn't even in there.  Cheesy
We either had the same English teacher or they had both been schooled similarly, because my EL teacher had a similar antipathy to the word 'nice' (or more to the point its over-use). I seem to recall that it originally meant clever or accurate (as in a nice distinction), but over-use has rendered it essentially meaningless.

Yes, you must have had a Mr Richards too, i'm guessing he would have been brought up by people with Victorian values and he was a bit of a character. He would never lose his temper in class, but simply use his wit, icy stare and superior knowledge of English language to cut down any trouble maker in his tracks. I remember him telling a scruffy trouble maker he was a tramp and a vagabond amongst other such choice describing words, some i'd never even heard of at the time! They don't make 'em like that any more.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SMFAds for Free Forums
Valid XHTML 1.0! Valid CSS!