Lancia Beta Forum
March 28, 2024, 11:44:40 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: 2024 Events Calendar http://www.betaboyz.myzen.co.uk/forum/index.php?board=92.0
Please feel free to add more.
 
   Home   Help Contact Admin Search Calendar Gallery Articles Login Register  
Pages: [1]
  Print  
Author Topic: Rear Crossmember  (Read 5921 times)
0 Members and 1 Guest are viewing this topic.
George-S
Sr. Member
****
Offline Offline

United Kingdom United Kingdom

Posts: 142



« on: December 20, 2016, 01:01:13 PM »

Hello

One of my Rear Crossmembers is bent beyond repair. Despite my best effort I cannot locate a replacement. any suggestions or places I can find a used one ? .. PLEASE help !
Logged
HFStuart
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1906



« Reply #1 on: December 20, 2016, 01:51:26 PM »

Hi,

Do you mean the tie rods that go between the rear hub and the centre of the car? They do get bent quite often by people trying to jack the car with them.

If so there are two types  - can you post a picture of yours?
Logged
George-S
Sr. Member
****
Offline Offline

United Kingdom United Kingdom

Posts: 142



« Reply #2 on: December 20, 2016, 08:49:47 PM »



Photos In the link below https://goo.gl/photos/jt1Fv4u8dNkvYrr49


Thanks for the help !
Logged
George-S
Sr. Member
****
Offline Offline

United Kingdom United Kingdom

Posts: 142



« Reply #3 on: December 20, 2016, 08:50:29 PM »

Does Seem very much as if someone had jacked it from it .
Logged
HFStuart
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1906



« Reply #4 on: December 20, 2016, 10:32:45 PM »

Yep - and then tried to straighten it by the look of it.

That's what I'd call a channel type arm ( it's a U section) the best bet is to find people breaking Betas or selling Beta parts and ask if they have one. You might also look on the overseas sites such as Lancia Cape Town or Midwest Bayless to see if they have one. They are not al that common for exactly the reason you need one.

Push come to shove you can make one with some tube and a couple of rod ends but finding an OE one might be simpler.
Logged
rossocorsa
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 2373


« Reply #5 on: December 20, 2016, 11:24:39 PM »

Can't tell for sure from the pics but it looks like you have a pre-facelift series two with all pressed arms ?? If so you'll have the funny eccentric bolt tracking adjustment, I think it should be possible to change to fabricated style arms with simple adjustment you might wish to do this. Not 100% on the compatability but no doubt someone else will know.
Logged
betaveloce
Sr. Member
****
Offline Offline

Belgium Belgium

Posts: 163



« Reply #6 on: December 21, 2016, 10:05:44 AM »

I think I may have this item New Old Stock. I will check tonight  Wink
Logged

Beta Coupé 1.8 '74
Beta Spider 1.6 '80
Beta HPE 2.0 i.e. '82
Delta Integrale 8V '88
Ypsilon 1.4 16V '09
George-S
Sr. Member
****
Offline Offline

United Kingdom United Kingdom

Posts: 142



« Reply #7 on: December 21, 2016, 10:17:05 PM »

THAT Would be great if you did !
Logged
betaveloce
Sr. Member
****
Offline Offline

Belgium Belgium

Posts: 163



« Reply #8 on: December 23, 2016, 09:36:21 AM »

I have found it. However, on the label, someone wrote 'HPE',  and here (http://lancia.co.za/article/Beta/Beta+Saloon+1.6+S1/Miscellaneous/2349727.html) it is listed for a saloon...
But I would suspect that it's the same for all models, no? Anyway, the part number is 82349727. They also have it in stock here, but rather expensive: http://www.autoricambi.rollgarage.it/meccanici/58799-asta-originale-fiat-lancia-82349727.html.

Like I said, the one I have is NOS, but I have to mention that the rubber from the bushes is a bit perished.

Let me know if you're interested and then I can try to find out how much postage to the UK would be  Wink
Logged

Beta Coupé 1.8 '74
Beta Spider 1.6 '80
Beta HPE 2.0 i.e. '82
Delta Integrale 8V '88
Ypsilon 1.4 16V '09
rossocorsa
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 2373


« Reply #9 on: December 23, 2016, 09:47:01 AM »

 Think the one for hpe/Berlina has a small fitting for the headlight leveling but otherwise would be the same
Logged
betaveloce
Sr. Member
****
Offline Offline

Belgium Belgium

Posts: 163



« Reply #10 on: December 24, 2016, 03:08:07 PM »

Of course, that has to be it, didn't think of that  Roll Eyes
Logged

Beta Coupé 1.8 '74
Beta Spider 1.6 '80
Beta HPE 2.0 i.e. '82
Delta Integrale 8V '88
Ypsilon 1.4 16V '09
betaveloce
Sr. Member
****
Offline Offline

Belgium Belgium

Posts: 163



« Reply #11 on: January 02, 2017, 03:33:18 PM »

shall I just put it back in my shed then...?   Undecided
Logged

Beta Coupé 1.8 '74
Beta Spider 1.6 '80
Beta HPE 2.0 i.e. '82
Delta Integrale 8V '88
Ypsilon 1.4 16V '09
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SMFAds for Free Forums
Valid XHTML 1.0! Valid CSS!