Lancia Beta Forum
March 28, 2024, 01:17:52 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: 2024 Events Calendar http://www.betaboyz.myzen.co.uk/forum/index.php?board=92.0
Please feel free to add more.
 
   Home   Help Contact Admin Search Calendar Gallery Articles Login Register  
Pages: [1]
  Print  
Author Topic: Engine swap - anyone done it?  (Read 15649 times)
0 Members and 1 Guest are viewing this topic.
Hawk
Hero Member
*****
Offline Offline

England England

Posts: 448



« on: August 21, 2012, 04:45:27 PM »

I am toying with the idea of a second Beta and turning it into a bit of a 'sleeper'.

Tuning the standard engine is expensive and I quite like the idea of modern running gear and a V6.  I am pretty handy with the spanners and have a mate with a full workshop / engine hoist etc who is also a coded welder but have no idea how involved an engine swap would be.

Ideally I'd prefer something Italian (Alfa V6) but would be happy with a Ford or Vauxhall (or whatever) lump.  Would probably buy a complete car so would have the ECU, gearbox etc. 

But I'm willing to stick pretty much anything in if it makes life a lot easier. 

Anyone got any tips / experience of doing anything similar?
Logged
dougdee123
Full Member
***
Offline Offline

United Kingdom United Kingdom

Posts: 94



« Reply #1 on: August 22, 2012, 05:18:27 PM »

Well, if you've taken your brave pills for today, how about the engine and drive train from a Thema 8.32?

Advantages - There are still a few about.

                    It is beta ish somewhat so integrating it with the bits you want to keep should be possible.

                    It would have a definite kudos - Ferrari badges and all that.

Disadvantages - Engine repairs would set new financial standards.

                       It may well be a money pit. (nothing new there then!)

Doug

                       

Logged
HFStuart
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1906



« Reply #2 on: August 22, 2012, 07:11:57 PM »

The only swap I've ever done is Fiat TC into rear engined Skoda - pretty simple as these things go.

To go in the front of the beta you'd want something fairly low and, ideally transverse.

I wondered about the Ford / Mazda V6. It's a wide angle V and fit beneath the bonnet of an MX-3 (1.8, 2.0 & 2.5 were all the same block) so it meets the criteria for low. And even in 1.8 form it produced 140bhp so no lack of go either. Plenty of them around from various Mazdas and the Ford Probe and of course they were all installed transversely

Challenging job - but not impossible.
« Last Edit: August 22, 2012, 07:14:18 PM by HFStuart » Logged
Zagato
Jr. Member
**
Offline Offline

Posts: 23


« Reply #3 on: August 22, 2012, 09:33:15 PM »

Vauxhall fitted a 3 litre V6 Diesel in the Vectra some years ago
.... they would be fairly rare mind
But bags of power ... and torque
And also an interesting engine sound 
Reasonable economy too

Just an idea ... no idea if it would fit mind
Logged
Hawk
Hero Member
*****
Offline Offline

England England

Posts: 448



« Reply #4 on: August 23, 2012, 08:52:36 AM »

I'm doing an Alfa V6 into my HPE, slowly. The Alfa 156 is a cheap enough donor these days.

Oooh - tell me more. 

Presume you are dropping the complete engine and gearbox in?  And that it fits in the engine bay?
Logged
peteracs
Administrator
Legendary Member
******
Online Online

United Kingdom United Kingdom

Posts: 3821


Peter Stokes


« Reply #5 on: August 23, 2012, 08:03:46 PM »

Hi

If you are looking for help on the Alfa V6 as a donor, though obviously not the same kind of install to a Beta, the guys over at stratosec.com have lots of experience with putting them into the replicas and the things to watch out for etc. Very friendly bunch with many years knowledge as the Alfa has been the choice engine since the 164 was around.

Peter
Logged

Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600
MattNoVAT
Administrator
Legendary Member
******
Offline Offline

France France

Posts: 1830



« Reply #6 on: August 23, 2012, 08:25:41 PM »

To be honest transplanting a V6 into a Beta engine bay is completely different to fitting a V6 into a Hawk Stratos, I've done it twice!  The Hawk chassis is easy to work on and does not need anywhere near as much "conversion" to accept the V6 unit or moving of heaters, fuse box etc, the Beta engine bay...... Different story altogether!!

The Stratos and the Hawk, which is the closest replica  by way of chassis design, was designed to take a V6 246 Dino power plant (even though they did try a prototype with a Fulvia V4) and the Beta was designed with the inline 4 cylinder in mind.

Just my 2 pennies
Logged

1981 2000 Coupe S2/FL
1976 1600 Coupe S1
2007 Ypsilon 1.3 Bi-Colori
HFStuart
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1906



« Reply #7 on: August 23, 2012, 08:54:44 PM »

X1/9 ??
Logged
fulviafiend
Jr. Member
**
Offline Offline

Posts: 32



« Reply #8 on: August 23, 2012, 09:11:37 PM »

This is how to fit an Alfa V6 into a Beta, not the easiest way but it does give easy access! Wink

Picture © copyright Lawrence Clift Photography


* BETA_V6.jpg (291.08 KB, 853x1280 - viewed 5287 times.)
Logged

1983 Lancia Beta Coupe 2000ie

http://www.rallylegendreplicas.com
peteracs
Administrator
Legendary Member
******
Online Online

United Kingdom United Kingdom

Posts: 3821


Peter Stokes


« Reply #9 on: August 24, 2012, 05:08:58 PM »

To be honest transplanting a V6 into a Beta engine bay is completely different to fitting a V6 into a Hawk Stratos, I've done it twice!  The Hawk chassis is easy to work on and does not need anywhere near as much "conversion" to accept the V6 unit or moving of heaters, fuse box etc, the Beta engine bay...... Different story altogether!!

The Stratos and the Hawk, which is the closest replica  by way of chassis design, was designed to take a V6 246 Dino power plant (even though they did try a prototype with a Fulvia V4) and the Beta was designed with the inline 4 cylinder in mind.

Just my 2 pennies

Hi Matt


Yes, sory was not too clear on what I meant. The Stratos replicas such as Hawk do have various engine fitment options, so not an unknown as the Beta would be in general. I was really thinking along the lines of 'when you have fitted the engine in', the next phase I guess is hooking everything up, and that is where I saw the Stratos guys may be useful as there are often discussions on gear linkage etc, which is not necessarily that easy I guess (never tried anything like this, so can only imagine).

Impressed you have built 2 Hawks, do you still have any of them?

Peter
Logged

Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600
MattNoVAT
Administrator
Legendary Member
******
Offline Offline

France France

Posts: 1830



« Reply #10 on: August 24, 2012, 05:48:10 PM »

I've sold both my Hawks now the first went to Italy and had a Dino 246 engine installed instead of the Alfa 164 12v 3 ltr, the second one is still in the UK.

Being over 6 foot 4 inches tall I don't really fit in a Stratos, which was designed with smaller Italian types in mind ( Like Sandro Munari !)  It was an itch that has now been scratched and was a great car to have after the my years of owning Integrales because it was such an attention getter!

It was and still is a drop dead gorgeous car IMO:

Here you go...


* Hawk HF3000 Stradale.JPG (167.39 KB, 658x493 - viewed 3826 times.)

* Hawk V6 Engine.JPG (154.8 KB, 705x529 - viewed 7631 times.)

* Hawk Interior.JPG (143.93 KB, 799x599 - viewed 3943 times.)
Logged

1981 2000 Coupe S2/FL
1976 1600 Coupe S1
2007 Ypsilon 1.3 Bi-Colori
mangocrazy
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1347


Graham Stewart


« Reply #11 on: September 04, 2012, 11:36:58 AM »

That Hawk/Stratos of yours (or ex-yours) is absolutely gorgeous. I've lusted after a Stratos replica after having seen the original on the RAC rally many years ago, and yours is/was absolutely spot on. Dare I ask how much it cost to build and how much you sold it on for? If you don't want to disclose, I fully understand.
Logged

1980 Lancia Beta Spider 2000 (S2FL)
2002 VW Transporter T4
2017 KTM Duke 690R
2008 Aprilia SL1000 Falco
1992 Ducati 888 SP3
1988 Honda VFR750F
1980 Yamaha RD350LC
peteracs
Administrator
Legendary Member
******
Online Online

United Kingdom United Kingdom

Posts: 3821


Peter Stokes


« Reply #12 on: September 04, 2012, 03:16:22 PM »

That Hawk/Stratos of yours (or ex-yours) is absolutely gorgeous. I've lusted after a Stratos replica after having seen the original on the RAC rally many years ago, and yours is/was absolutely spot on. Dare I ask how much it cost to build and how much you sold it on for? If you don't want to disclose, I fully understand.

I also have a hankering to build one or at least own/rebuild a pre built for a while, being 5' 8" helps with the fitting into them, though I think the newer Listerbell can accomodate taller folk more easily.

Check out the Stratos Enthusiasts Forum here

www.stratosec.com

The general consensus is a new build with mainly new parts (apart from donor engine/gearbox etc) will be around £30k, used ones can be had for £20k-£33k+ and some may have been sold recently for as low as £15k, but have no first hand knowledge on that lower value. There are one or two available now should you be feeling flush!

Peter
 
Logged

Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600
MattNoVAT
Administrator
Legendary Member
******
Offline Offline

France France

Posts: 1830



« Reply #13 on: September 04, 2012, 04:29:40 PM »

One thing I would say is that it is not an easy car to build, you need lots of tools, lots of skill, lots of time and lots of money.  Nothing for a Strat rep is cheap and lots of parts are hard to find.
Logged

1981 2000 Coupe S2/FL
1976 1600 Coupe S1
2007 Ypsilon 1.3 Bi-Colori
archigraphe
Sr. Member
****
Offline Offline

Posts: 131


« Reply #14 on: September 14, 2012, 01:06:35 PM »

And why Not an integrale engine with conversion of the subframe for the passage of the exhaust?

This Engine seems to have same design , but tilt to front from 20° .

And why not an Integrale Beta ?
Logged
MattNoVAT
Administrator
Legendary Member
******
Offline Offline

France France

Posts: 1830



« Reply #15 on: September 14, 2012, 03:14:20 PM »

You would be better off using a Thema 16v Turbo Phase 3 with a LSD unless you make the Beta 4x4. (Painful)

Inlet / Exhausts are reverse design to Beta (exhaust is at the front)
Logged

1981 2000 Coupe S2/FL
1976 1600 Coupe S1
2007 Ypsilon 1.3 Bi-Colori
archigraphe
Sr. Member
****
Offline Offline

Posts: 131


« Reply #16 on: September 14, 2012, 07:18:53 PM »

Are the thema gearbox bolt on to Beta block?
Logged
oldspider
Newbie
*
Offline Offline

Canada Canada

Posts: 3


« Reply #17 on: January 29, 2014, 05:31:34 PM »

I'm glad the OP asked this, because it would be something I would want to consider myself!
If I could get a decent Spyder body and completely transplant the engine and gear box from something contemporary (doesn't have to be fancy). I'm thinking a newer Focus!!

I know this is like painting a moustache on the Mona Lisa, and I don't know if the fit is impossible, but I'd definitely like to know if such a thing has been done.
Logged
HFStuart
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1906



« Reply #18 on: January 29, 2014, 07:37:35 PM »

There was a chap on here a few months ago fitting a Jaguar 4.0 6 cylinder into a Beta! That was a rear drive conversion though.

I suspect a modern transverse installation would be even more challenging as the bonnet line is very low by modern standards.
Logged
slowe
Full Member
***
Offline Offline

Posts: 99


« Reply #19 on: February 02, 2014, 11:09:04 PM »

I think the Jag 4.0 6 cylinder project has bitten the dust. I think he was trying to sell some of his lancia parts early last year.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SMFAds for Free Forums
Valid XHTML 1.0! Valid CSS!