Lancia Beta Forum
August 19, 2022, 08:39:25 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Beta Meeta 50th Anniversary 2022 Bookings now open
https://www.betaboyz.myzen.co.uk/forum/index.php?topic=4385.0
 
   Home   Help Contact Admin Search Calendar Gallery Articles Login Register  
Pages: [1]
  Print  
Author Topic: Fitting gear linkage bushes  (Read 7049 times)
0 Members and 1 Guest are viewing this topic.
lanciamad
http://www.flickr.com/photos/lanciamad
Hero Member
*****
Offline Offline

England England

Posts: 692


Marcus Robinson


« on: March 18, 2012, 09:01:18 PM »

I'm in the process of changing the gear linkage bushes on my hpe, i've managed to fit them without any hassle to the linkage; just after some advice about fitting the linkage to the car.

I took the easy option my removing the bracketry off the gearbox and pressing that one in with the vice

The other end of the linkage looks to be more troublesome, do you need to remove part of the linkage to press the bush onto the ball stud, or should I be able to get away with keeping everything in place and using a hydraulic jack to push the linkage up onto the stud?

Opinions?
Logged

1982 - Lancia Beta HPE 2000ie http://www.betaboyz.myzen.co.uk/forum/index.php?topic=472.0
1989 - Lancia Delta 16v integrale
1992 - Lancia Thema 2.0 16v Turbo
2001 - Honda Civic Type R EP3
2011 - Range Rover Sport
WestonE
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1540


« Reply #1 on: March 18, 2012, 10:07:37 PM »

Find a G clamp or water pump pliers to squeeze it together having put grease in first.


Eric
Logged
thirdbrother3
Jr. Member
**
Offline Offline

Posts: 34



« Reply #2 on: March 26, 2012, 11:52:16 AM »

ive used water pump pliers as part of an emergency repair.



my friend had been used to driving an auto so was perhaps a little rough with the worn linkages. typically this was in the queue for the cross channel ferry. got the car on the ferry with only 3rd and 4th gear available (anyone smell clutch!), then spent the crossing inspecting the haynes manual.

access  is tricky with the parts fitted, and without decent lift (see photo) but i found an arm through the driveshaft rubber the best access for the water pump plyers. as a temporary fix i also put a combination of tie clips around them to allow movement but prevent ball popping out during European tour.
Logged
archigraphe
Sr. Member
****
Offline Offline

Posts: 131


« Reply #3 on: November 07, 2012, 12:21:11 PM »

It was exactly the same problem with my first "official" rally on the "boucle de Chareleroi",  In the start of the rally in the "closed park", I lost the 1st, 2nd , 5th and rear gear..... Shocked

I've doing the two first special, with only 3rd and 4th gear.... In start of the night, I've decided to stop the rally..

I can confirm this is a very idiot failure...... Undecided , I could repair on the park.... but It was my first Beta and I was a litle young to rapidly find the failure...

Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SMFAds for Free Forums
Valid XHTML 1.0! Valid CSS!