Lancia Beta Forum
November 01, 2024, 12:14:02 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: 2024 Events Calendar http://www.betaboyz.myzen.co.uk/forum/index.php?board=92.0
Please feel free to add more.
 
   Home   Help Contact Admin Search Calendar Gallery Articles Login Register  
Pages: [1]
  Print  
Author Topic: Blanking off mechanical pump  (Read 2877 times)
0 Members and 1 Guest are viewing this topic.
JohnFol
Hero Member
*****
Offline Offline

United Kingdom United Kingdom

Posts: 388



« on: July 01, 2020, 06:16:00 PM »

Afternoon all, I'm fitting an electric fuel pump and inertia switch in a few week's time. Clearly the fuel pipes will no longer go via the mechanical pump, but the pump is still "connected" to the engine, I guess by a cam.

Has anyone taken the extra step to remove the pump and blank off the hole?
Logged
betaveloce
Sr. Member
****
Offline Offline

Belgium Belgium

Posts: 167



« Reply #1 on: July 01, 2020, 06:42:28 PM »

Afternoon all, I'm fitting an electric fuel pump and inertia switch in a few week's time. Clearly the fuel pipes will no longer go via the mechanical pump, but the pump is still "connected" to the engine, I guess by a cam.

Has anyone taken the extra step to remove the pump and blank off the hole?

Yes, I removed the mechanical pump and fitted the blanking plate from lanciabetaparts.co.uk (but only about 10 years after installing the electrical pump I must admit  Cheesy )
Logged

Beta Coupé 1.8 '74
Beta Spider 1.6 '80
Beta HPE 2.0 i.e. '82
Delta Integrale 8V '88
Ypsilon 1.4 16V '09
WestonE
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1761


« Reply #2 on: July 02, 2020, 08:43:56 AM »

Hi John

Guy Croft sells blanking plates and more importantly his book tells you how to remove the drive lobe from the Aux shaft removing the risk of it hitting no 2 conrod and breaking it if the Aux DS is not perfectly timed. Something to have to hand if you are changing the cam belt.

Enjoy

Eric
Logged
JohnFol
Hero Member
*****
Offline Offline

United Kingdom United Kingdom

Posts: 388



« Reply #3 on: July 02, 2020, 11:24:58 AM »

Thanks Eric.

On balance the loss of 1hp due to weight of pump / load on drive lobe vs risk of breaking con rod, I think I might just leave it for another day!
Logged
WestonE
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1761


« Reply #4 on: July 02, 2020, 05:30:54 PM »

Hi John

Fit the Electric pump the lobe will be fine if it is now i.e. no light knocking noise. But removing the manual pump which are only just good enough when new will give you the change later to remove the Aux DS risk and make cam belt changes less stressful.

Eric
Logged
mangocrazy
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1363


Graham Stewart


« Reply #5 on: July 03, 2020, 11:00:18 PM »

With engine 'in situ' I can understand your reluctance to remove the fuel pump/blank the aperture off/cut the fuel pump lobe off. But if you ever take the engine out of the car, those tasks should be high up on your list...
Logged

1980 Lancia Beta Spider 2000 (S2FL)
2002 VW Transporter T4
2017 KTM Duke 690R
2008 Aprilia SL1000 Falco
1992 Ducati 888 SP3
1988 Honda VFR750F
1980 Yamaha RD350LC
JohnFol
Hero Member
*****
Offline Offline

United Kingdom United Kingdom

Posts: 388



« Reply #6 on: July 05, 2022, 03:58:15 PM »

I now have the mechanical fuel pump removed so I can take manifold off.

If I read this right, I can just fabricate a piece of metal sheet the same external shape as the gasket and bolt it back on (with a bit of sealant). Is that right ?
Logged
peteracs
Administrator
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 3998


Peter Stokes


« Reply #7 on: July 05, 2022, 04:18:57 PM »

Hi John

You are correct.

Peter
Logged

Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SMFAds for Free Forums
Valid XHTML 1.0! Valid CSS!