Lancia Beta Forum
November 01, 2024, 12:48:56 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: 2024 Events Calendar http://www.betaboyz.myzen.co.uk/forum/index.php?board=92.0
Please feel free to add more.
 
   Home   Help Contact Admin Search Calendar Gallery Articles Login Register  
Pages: [1]
  Print  
Author Topic: k&n filter housing for lancia beta 2000 carb  (Read 4264 times)
0 Members and 1 Guest are viewing this topic.
Lancia Beta 2000
Jr. Member
**
Offline Offline

Posts: 44



« on: May 13, 2010, 02:00:08 AM »

Hi!
someone of you have try this filter?
http://www.knfilters.com/search/product.aspx?Prod=56-9029

I would to try it in my 2000 coupe with a 34 datr carburettor..
What do you think?
thank you!!
 
Logged
thecolonel
Guest
« Reply #1 on: May 13, 2010, 11:47:08 AM »

I use one on the Gamma, you may need to fit a cold air supply and the mixture
will need adjusting to compensate for the additional air.
Logged
Ammy
Sr. Member
****
Offline Offline

United Kingdom United Kingdom

Posts: 178


« Reply #2 on: May 13, 2010, 07:13:05 PM »

I've used one on my 2000 DATR Spyder for 15 years without any problems.  You'll have to modify the base to take a connection to the crankcase breather.   Standard 22mm plumbing fittings will do this.

Ammy
Logged
droptop
Hero Member
*****
Offline Offline

Ireland, Republic of Ireland, Republic of

Posts: 701



« Reply #3 on: May 14, 2010, 08:35:55 AM »

I am planning the same for my '78 spider, but am hesitant because of having to adjust the mixture. All the adjustment screws are blanked off with plugs from the factory and I don't know where to begin.
As for the crankcase breather, I planned to fit a catch tank and one of K&N's breather filters.
On the subject of fuel, do I need a lead additive and/or octane booster in my fuel?
Hoping to have the car on the road in about 2 weeks and don't want extra problems.
All advice welcome.
hanks folks.
Logged

Rust never sleeps
Lancia Beta 2000
Jr. Member
**
Offline Offline

Posts: 44



« Reply #4 on: May 14, 2010, 11:21:02 AM »

Hi droptop,
Beta engine should go with a 98RON fuel..
For adjusting the mixture, you don't have to screw or unscrew nothing that is blanked off..
If the car don't go well after change of filter, the only screws that you have to change are primary and secondary main jets, air jets.
Those 4 screw (with 6 jets) are located inside the air filtering housing
Logged
droptop
Hero Member
*****
Offline Offline

Ireland, Republic of Ireland, Republic of

Posts: 701



« Reply #5 on: May 14, 2010, 01:03:51 PM »

 Cool Thanks for that. I will try tonight to locate them and take it from there
Logged

Rust never sleeps
rodney3010
Full Member
***
Offline Offline

Posts: 84


« Reply #6 on: October 18, 2012, 05:58:42 PM »

I'd be interested if you went ahead with this filter and how significant the difference was? Did you also fit the catch tank and filter? Any photos much appreciated
Rodders
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SMFAds for Free Forums
Valid XHTML 1.0! Valid CSS!