Lancia Beta Forum
November 01, 2024, 12:15:40 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Looking for Lancia Beta parts: www.lanciabetaparts.co.uk
 
   Home   Help Contact Admin Search Calendar Gallery Articles Login Register  
Pages: [1]
  Print  
Author Topic: Distributor setting  (Read 2194 times)
0 Members and 1 Guest are viewing this topic.
Spyderfan
Jr. Member
**
Offline Offline

United Kingdom United Kingdom

Posts: 46


« on: September 24, 2017, 07:46:54 AM »

If I can see the second valve is on the downward stroke , where do I position my distributor correctly please ?
Logged
capriblu
Sr. Member
****
Offline Offline

United Kingdom United Kingdom

Posts: 166



« Reply #1 on: September 26, 2017, 01:39:04 PM »

I would approach by finding top dead centre - line up appropriate mark on crank pulley wheel with TDC mark (depending on age and variant - then either lower mark on timing belt cover OR separate TDC pointer mark) - cylinders 1 & 4 should be at maximum height (double check) and holes on cam wheels lined up with lugs on cam boxes.   With engine in TDC position then distributor rotor arm should be at a position corresponding to contact in cap that feeds ignition lead to no 4 cylinder. Exact ignition timing can be set by slight adjustment of distributor body back/forth with engine running.  Make sure plug leads are sequenced in correct firing order 4,2,1,3 ....... 
Logged

!980 2.0 Coupe - Owned since 1990
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SMFAds for Free Forums
Valid XHTML 1.0! Valid CSS!