|
Title: Factory swarf found Post by: Nigel on November 21, 2021, 04:17:03 PM When they built my car it appears that a piece or two didn't
fit properly, and they had to use aviation snips to do some trimming. These three slivers were embedded in the anti-drum layer in the rear foot well. I found them because one punctured a finger while I was removing the upper felt. The ends were pointing up out of the bitumen just like razor blades. Title: Re: Factory swarf found Post by: WestonE on November 21, 2021, 06:56:25 PM Ouch !! ;)
|