|
Title: Road springs Post by: TreviDash on August 02, 2009, 02:01:03 AM Would somebody be able to list the Beta coil spring sizes, model to model, please?
I have this set (http://i.ebayimg.com/03/!B(W)Gh!CGk~$(KGrHgoH-CwEjlLluz7qBKb14h6yZQ~~_35.JPG) With dimensions: Length 33 cm, Diameter 16 cm. Thanks. Title: Re: Road springs Post by: rossocorsa on August 02, 2009, 03:00:02 PM they look after market to me
Title: Re: Road springs Post by: MattNoVAT on August 08, 2009, 04:00:14 PM Yep, me too.
Title: Re: Road springs Post by: TreviDash on August 10, 2009, 10:14:56 PM Thanks, but umm that wasn't what I asked..... :P
Title: Re: Road springs Post by: HFStuart on August 11, 2009, 08:40:27 AM PM me with your e-mail and I'll send you the tech data book with all the spring lengths (and a shed load more)
Title: Re: Road springs Post by: TreviDash on August 11, 2009, 05:57:44 PM Thanks. My email address is on my profile
Title: Re: Road springs Post by: HFStuart on August 11, 2009, 06:58:30 PM Done
Title: Re: Road springs Post by: MattNoVAT on August 11, 2009, 07:52:04 PM This may or may not work..
Title: Re: Road springs Post by: MattNoVAT on August 11, 2009, 08:15:47 PM Next image in the sequence....
Title: Re: Road springs Post by: MattNoVAT on August 11, 2009, 08:17:02 PM And the final image .... I'd suggest maybe copy the image and then blow it up a wee bit if you cannot make out the numbers.
Title: Re: Road springs Post by: HFStuart on August 11, 2009, 09:36:39 PM Thanks. My email address is on my profile Do you have another ? Hotmail bounced both e-mails probably as they're too large. Title: Re: Road springs Post by: hongkongphooey on January 14, 2010, 08:57:06 AM This may or may not work.. Does anything on there relate to the actual spring compression rates? (sorry for the thread bump,you may get this a lot with me ;D) Title: Re: Road springs Post by: HFStuart on January 14, 2010, 10:58:20 AM You can work it out from the free length, length under static load and load figures in the first picture.
Stuart Title: Re: Road springs Post by: hongkongphooey on January 14, 2010, 07:40:21 PM So for the coupe front,i make that compression of 308mm (12.13") which seems a lot. Under 330kg (726lb).
So that's 60lb/in springs for the front. That seems weak,i could compress that by 3" just by standing on it. Or i on the wrong track? Title: Re: Road springs Post by: lanciamad on January 14, 2010, 10:29:24 PM Compression of 208 mm I make it, think that's where you went wrong.
Title: Re: Road springs Post by: lanciamad on January 14, 2010, 10:32:51 PM 88.8 lb/in
Title: Re: Road springs Post by: lanciamad on January 14, 2010, 10:49:46 PM Betaboyz lowering springs, 30mm lower, 25% uprated, must be around 111 lb/in.
Title: Re: Road springs Post by: hongkongphooey on January 14, 2010, 11:01:38 PM Compression of 208 mm I make it, think that's where you went wrong. LOL....Oh yeah! ;D Still,88 is weaker than i expected. I may go for some home made coilovers actually as the springs on mine are already cut and are still too squishy. Title: Re: Road springs Post by: Lancia Beta 2000 on June 30, 2010, 11:05:41 AM Hi Guys,
someone of you, can tell me the inner diameter of coupe springs?? I can't read this value on my tech books.. Thank you very much.. |