|
Title: Heater inlet flap Post by: jwhelan on October 07, 2018, 01:12:27 PM Hi folks,
Is it possible to adjust the heater inlet flap movement (84 HPE)? Mine doesn't close by quite some margin, and the lever doesn't move more than about 60% of the way across. Hopefully the answer doesn't involve removing the heater! Thanks, Jay Title: Re: Heater inlet flap Post by: squiglyzigly on October 13, 2018, 12:36:44 PM I think the cable is secured to the dashboard levers with a crude plastic clamp using a self tapping screw. If you take the radio out and remove the surround, then shine a mirror on the back of the levers you should be able to see if the cable has slipped through the clamp. If you need to adjust it, then I think you can unscrew the lever set and pull them forward to do so.
|