Lancia Beta Forum

Technical stuff => Brakes => Topic started by: Oldbones on April 12, 2013, 08:09:15 PM



Title: Brakes downgraded
Post by: Oldbones on April 12, 2013, 08:09:15 PM
I have spent the winter fitting a guy croft manifold and twin dellortos and have just taken her out for her first run. She sounds and runs great but have noticed the brake pedal travel is longer and the efficiency is reduced. Could this be because the vacuum is now from just one port of the inlet manifold and thus reduced and has anyone experienced this and if so have you come up with a solution

Cheers

John


Title: Re: Brakes downgraded
Post by: HFStuart on April 12, 2013, 10:31:10 PM
Just out of interest have you left the non return valve in the line to the servo and did you test it?


Title: Re: Brakes downgraded
Post by: 75coupe on April 12, 2013, 10:42:33 PM
I never noticed any difference with mine. I don't think your issue is related to your carbs, there is still plenty of vacuum available from 1 cylinder!

Make sure the check valve is ok in the vacuum hose to the servo and fitted the right way round.

The long pedal travel is more of a concern has anything else been done? Are any of the calipers partially seized?


Title: Re: Brakes downgraded
Post by: VXdeMayo on April 13, 2013, 10:00:09 AM
Dear John,
might it be that you are going much faster than previously?? Check out the speedo. ;D

best,
Chas.


Title: Re: Brakes downgraded
Post by: Oldbones on April 14, 2013, 05:49:40 PM
Thanks for the advise

I have taken out the non return valve and it seem to be ok with the blow/suck test. Just been for a good run and the brakes while no better do not pull so don't think one could be stuck open

Chas you are right the torque is much improved and beautifully free revving why on earth didn't lancia fit them on new cars like Alfa what a fantastic improvement on performance ;D

Cheers
Olbones