Lancia Beta Forum

Technical stuff => Suspension => Topic started by: archigraphe on January 25, 2013, 05:24:34 PM



Title: Absorber for cool rallying application
Post by: archigraphe on January 25, 2013, 05:24:34 PM
Hi to all...

So I can have 4 spax, nor 4 B6 bilstein, nor 2 Rear KyB and adapted Front....

But I ask you for rallying application with 90 %  tarmac , 8% dirt and 2% agricol machine road.... great moment of solitude ::)

with no circuit race, which could be the more adapted?

Bilstein may be hard, but I don't know Spax.......


Title: Re: Absorber for cool rallying application
Post by: WestonE on January 25, 2013, 07:54:48 PM
I had Gaz make me Gaz Gold Coil over units with adjustable top mounts on the front and re-using the front top mounts on the rear. I have 14 clicks of bump and rebound adjustment a wide choice of springs and I can have the car corner weighted if I wish. Because the springs are smaller I can run wider wheels/ tyres within the arches.

The Spax units are top adjustable so you have some scope to increase the damping to match stiffer springs.

Eric