|
Title: Timing marks on an i.e engine? Post by: Spyder79 on July 07, 2010, 06:55:36 PM Does anyone know where the timing marks are on a 2000 i.e engine?
My Spyder engine has an i.e engine in but i cannot see the marks for tdc etc anywhere. Tried a timing light and nothing shows up. any ideas? Title: Re: Timing marks on an i.e engine? Post by: thecolonel on July 07, 2010, 10:50:51 PM Flywheel mark can be seen after removing the little plastic cover on the bellhousing.
Cam wheel pointers/marks are on the metal plate that the yellow belt cover is attached to, these align with small holes in the pulleys. hope that makes sense. Title: Re: Timing marks on an i.e engine? Post by: Neil-yaj396 on July 09, 2010, 08:51:33 AM I think there are some marks on the bottom 'point' of the yellow cover as well.
Title: Re: Timing marks on an i.e engine? Post by: Thotos on July 09, 2010, 12:44:51 PM For my Trevi there's a couple of small access panels in the offside wheel arch liner and the crankshaft marks can be seen though them. But I found it easier to remove the offside front wheel and complete front section of wheel arch liner to set the ignition timing. You need a strobe light with fairly long leads!
|