Lancia Beta Forum
December 13, 2024, 07:02:43 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Looking for Lancia Beta parts: www.lanciabetaparts.co.uk
 
   Home   Help Contact Admin Search Calendar Gallery Articles Login Register  
Pages: [1]
  Print  
Author Topic: 1981 Zagato PAS Tie Rod Ends?  (Read 417 times)
0 Members and 1 Guest are viewing this topic.
alsgro33
Newbie
*
Offline Offline

United States United States

Posts: 9


« on: November 14, 2024, 08:26:10 PM »

Well, the shocks are in, but noticed when doing that job that the tie rods are destroyed. Anyone know where I can find replacements? Did not realize they would also be tough to source. Mine are the "unthreaded" kind that screw onto the track rod, I believe...
Logged
peteracs
Administrator
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 4040


Peter Stokes


« Reply #1 on: November 14, 2024, 11:36:56 PM »

Hi

Assuming the standard ZF power steering rack, Mark has them in stock.

https://353652584127257704.weebly.com/store/p56/ZF_Power_Steering_Track_Rod_End.html

They are slightly odd sizing and not commonly available when I tried to source them.

Peter
Logged

Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600
alsgro33
Newbie
*
Offline Offline

United States United States

Posts: 9


« Reply #2 on: November 15, 2024, 06:41:47 PM »

Thanks! Mark's site wasn't loading for me here in California, but today it's back. Maybe someone kinked the fiber cables across the Atlantic?

Anyway, coming from owning a few Fiat 124s, I didn't realize sourcing parts for the Beta would be such a challenge! Appreciate it.
Logged
alsgro33
Newbie
*
Offline Offline

United States United States

Posts: 9


« Reply #3 on: November 19, 2024, 06:34:08 PM »

Has anyone ever experienced this? I grabbed the tie rods off the (ZF) zagato yesterday, and the driver's side seems to be a larger threaded section than the passenger side.

Maybe this was from some earlier repair job?  Not sure if this is normal or the best way forward. Any help/thoughts appreciated!



* IMG_6609_Sm.jpg (581.4 KB, 1331x998 - viewed 88 times.)

* IMG_6610_Sm.jpg (413.22 KB, 1331x998 - viewed 85 times.)
Logged
WestonE
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1779


« Reply #4 on: November 19, 2024, 06:51:12 PM »

You might have 1 steering arm from a non PAS rack and 1 correct one for PAS which are more substantial with bigger track rod ends. 16mm fine pitch from memory. I think non PAS Racks are 14mm fine pitch.

I might have uploaded PAS rack pictures in my members vehicle area. Note I converted my UK Beta Spyder to PAS from a VX Coupe.

Eric 
Logged
alsgro33
Newbie
*
Offline Offline

United States United States

Posts: 9


« Reply #5 on: November 19, 2024, 11:12:47 PM »

Thanks for the reply. I just looked up the part # printed on the 'bigger' track rod end, and it's actually coming up as a Porsche part... Weird. Someone must have gotten creative at some point in this car's life... Thanks for the response.
Logged
peteracs
Administrator
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 4040


Peter Stokes


« Reply #6 on: November 20, 2024, 12:02:56 AM »

Hi

Just to confirm they should both be the same and yes suspect the Porsche one was due to not being able to find a correct one due to being hard to find…..

Peter
Logged

Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SMFAds for Free Forums
Valid XHTML 1.0! Valid CSS!