Lancia Beta Forum
November 05, 2024, 04:01:43 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: 2024 Events Calendar http://www.betaboyz.myzen.co.uk/forum/index.php?board=92.0
Please feel free to add more.
 
   Home   Help Contact Admin Search Calendar Gallery Articles Login Register  
Pages: [1]
  Print  
Author Topic: Help! 40dcnf jetting  (Read 2776 times)
0 Members and 1 Guest are viewing this topic.
Dynomax
Newbie
*
Offline Offline

France France

Posts: 9


« on: December 11, 2023, 05:38:08 PM »

I'm looking for a bit of a starting point for the jetting of a 40dcnf on a Volumex. I've fitted the carburetor and got the car running pretty well but it sounds like it's pinking slightly accelerating from lowish revs. It didn't do this on the original carb so I'm thinking that the timing is OK.
I've just installed an AFR gauge so should be able to get the mixture right but don't know what size chokes and jets I should be starting with just to get a head start.
I've seen a post on here that listed the jets that is a good starting point but I'll be dammed if I can find it now I need it.
Can somebody point me in the right direction?
Logged
WestonE
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1762


« Reply #1 on: December 12, 2023, 06:59:24 PM »

This is listed in Guy Crofts first book which I seem to have hidden well in my house move! Hopefully someone who can actually find it will share it with you. You will want to go to a Rolling Road to set it up properly.

Eric 
Logged
Dynomax
Newbie
*
Offline Offline

France France

Posts: 9


« Reply #2 on: December 12, 2023, 10:28:28 PM »

Thanks Eric, I've been looking for a copy of Guy's book but so far not much look. As you say hopefully someone has a copy and reads this post and let's me know the recommended starting position.
Logged
smithymc
Hero Member
*****
Offline Offline

Posts: 679


« Reply #3 on: December 13, 2023, 11:17:27 AM »

You mean this?

Mark


* thumbnail_IMG_8196.jpg (493.85 KB, 1440x1920 - viewed 382 times.)
Logged
Dynomax
Newbie
*
Offline Offline

France France

Posts: 9


« Reply #4 on: December 13, 2023, 07:55:06 PM »

Hi Mark, yes that's the sort of thing, however I don't see the Volumex on there and it's only 1 40 DCNF not 2.
Logged
smithymc
Hero Member
*****
Offline Offline

Posts: 679


« Reply #5 on: December 14, 2023, 11:30:57 AM »

There isn't anything else I can see in my edition of the book that discusses carburation on a vx other than the extracts below.

Hope they help.

Mark


* vol2.jpg (710.42 KB, 1440x1920 - viewed 356 times.)

* Vol1.jpg (735.29 KB, 1440x1920 - viewed 402 times.)
Logged
rossocorsa
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 2403


« Reply #6 on: December 14, 2023, 12:24:41 PM »

Are you using the standard inlet cam or have you changed it? Many folk have fitted a standard 2 litre inlet camshaft or a fiat 130tc one, this will in theory make a decent difference. The choke needs to be relatively small, around 28mm, that is what I have on mine but it's yet to be tested in anger but it seems to run well out of the car.

Logged
Dynomax
Newbie
*
Offline Offline

France France

Posts: 9


« Reply #7 on: December 15, 2023, 09:03:52 PM »

I have a 2.0 ie  camshaft, just waiting for vernier pulleys.
Logged
Dynomax
Newbie
*
Offline Offline

France France

Posts: 9


« Reply #8 on: December 15, 2023, 09:07:20 PM »

There isn't anything else I can see in my edition of the book that discusses carburation on a vx other than the extracts below.

Hope they help.

Mark
Thanks Mark that's good.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SMFAds for Free Forums
Valid XHTML 1.0! Valid CSS!