Lancia Beta Forum
March 29, 2024, 07:58:47 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: 2024 Events Calendar http://www.betaboyz.myzen.co.uk/forum/index.php?board=92.0
Please feel free to add more.
 
   Home   Help Contact Admin Search Calendar Gallery Articles Login Register  
Pages: [1]
  Print  
Author Topic: Cambelt idler tensioner  (Read 887 times)
0 Members and 1 Guest are viewing this topic.
The_Matrix_Master
Sr. Member
****
Offline Offline

Posts: 110


« on: August 24, 2022, 05:43:08 PM »

My local garage is replacing the cambelt on my 1600 carb 1975 beta and says it needs the idler replacing any ideas of the part number and were to source one from.
Also require a new oil filter is the part required a Mahle OC473 again sourcing info if possible
Cheers
Logged
peteracs
Administrator
Legendary Member
******
Online Online

United Kingdom United Kingdom

Posts: 3822


Peter Stokes


« Reply #1 on: August 24, 2022, 07:29:52 PM »

Hi

The OE idler has a circlip and the bearing can be replaced. Non OE can be sealed so need the whole assembly which is a bit more difficult to find. The bearing itself is easy to find.

A quick Google on the filter should find one for you

Peter
« Last Edit: August 24, 2022, 09:14:59 PM by peteracs » Logged

Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600
The_Matrix_Master
Sr. Member
****
Offline Offline

Posts: 110


« Reply #2 on: August 24, 2022, 09:01:45 PM »

Any ideas where to start in sourcing a stockist for either the replacement bearing or sealed unit ?
Checked Betaboyz parts and nothing there
Cheers
Logged
peteracs
Administrator
Legendary Member
******
Online Online

United Kingdom United Kingdom

Posts: 3822


Peter Stokes


« Reply #3 on: August 24, 2022, 09:20:32 PM »

Hi

See this thread

http://www.betaboyz.myzen.co.uk/forum/index.php?topic=4078.0

Remember the complete tensioner pulley is different for 1600 and 2000 in diameter but the bearing is the same for both

As to stockist on the bearing any decent bearing supplier will have them, sorry no idea on complete assembly

Peter
Logged

Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600
Nigel
Hero Member
*****
Offline Offline

United Kingdom United Kingdom

Posts: 861



« Reply #4 on: August 24, 2022, 10:19:18 PM »

Hi Matrix,

Just read your PM and thought i'd put this here.

I got mine from RS under the part number 3205-A-2RSITN9/HT33

This is just the bearing, it fitted with no effort into my carrier. I think
it is held in with a circlip, and is a loose interference fit.

Hope that helps
Nigel
Logged

1984 2.0 Carb HPE [ex Aus] Grigio Finanza.
2007 Mazda 6 2.3 [current daily, highly recommended]
The past:
1980 2.0 HPE White in South Africa [hope it survives!]
1976 1.6 Coupe Lancia Blu [PFG 76R] [probably deceased]
oh,and an Uno Turbo 1997 also in SA [stolen,never recovered]
The_Matrix_Master
Sr. Member
****
Offline Offline

Posts: 110


« Reply #5 on: August 24, 2022, 10:31:25 PM »

Thanks Nigel I'll give them a try
I have been looking direct from suppliers e.g. Ricambo and on Ebay prices are all over the place from £25 to over £100 and each time they say they fit Beta but they seem too large at 28mm diameter
Some sites asks for the OEM part number which I don't know and without that can't get much further but may be able to make some progress now
Cheers
Logged
peteracs
Administrator
Legendary Member
******
Online Online

United Kingdom United Kingdom

Posts: 3822


Peter Stokes


« Reply #6 on: August 24, 2022, 11:16:50 PM »

Hi

Just checked, I bought 2RS1TN9/MT33 SKF from Bearing King LTD earlier this year, price was £34 delivered.

Peter
Logged

Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600
The_Matrix_Master
Sr. Member
****
Offline Offline

Posts: 110


« Reply #7 on: August 24, 2022, 11:20:14 PM »

Thanks Peter
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SMFAds for Free Forums
Valid XHTML 1.0! Valid CSS!