Lancia Beta Forum
December 03, 2024, 03:24:36 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: 2024 Events Calendar http://www.betaboyz.myzen.co.uk/forum/index.php?board=92.0
Please feel free to add more.
 
   Home   Help Contact Admin Search Calendar Gallery Articles Login Register  
Pages: [1]
  Print  
Author Topic: Spyder rear hood frame latches  (Read 2805 times)
0 Members and 1 Guest are viewing this topic.
Clifford
Sr. Member
****
Offline Offline

United Kingdom United Kingdom

Posts: 178


« on: November 30, 2021, 07:05:12 PM »

Hi.
When refurbishing a hood frame for a Spyder, has anyone replaced the torsion springs on the latches which clip to the rollover section of the roof?
There are two springs to each latch.
The springs on the latches I have are rusted and the legs have disappeared from them and therefore no torsion.
It looks like I would need to grind the end of the pins to get them out and make new pins with new springs fitted if I can find the right size springs.

Also is there any way of avoiding the ends of the rivets falling into the bow when you drill the rivets to remove the straps to then have the bow painted.
Cheers
C
Logged
peteracs
Administrator
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 4020


Peter Stokes


« Reply #1 on: November 30, 2021, 10:35:40 PM »

Hi Clifford

If you post a photo I may have some spare ones which will save you the effort?

Peter
Logged

Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600
Clifford
Sr. Member
****
Offline Offline

United Kingdom United Kingdom

Posts: 178


« Reply #2 on: December 01, 2021, 02:49:00 PM »

That would be brilliant Peter.
Let me figure out how to get some photos up and will do that.
Cheers!
Logged
Clifford
Sr. Member
****
Offline Offline

United Kingdom United Kingdom

Posts: 178


« Reply #3 on: December 01, 2021, 05:40:08 PM »

Here you go Peter.
Springs circled.
Cheers. C


* IMG_20211201_161516_compress52.jpg (590.51 KB, 3968x2976 - viewed 477 times.)

* IMG_20211201_161550_compress9.jpg (426.19 KB, 3968x2976 - viewed 476 times.)
Logged
Clifford
Sr. Member
****
Offline Offline

United Kingdom United Kingdom

Posts: 178


« Reply #4 on: December 01, 2021, 05:41:17 PM »

Pic from the other sides


* IMG_20211201_161027_compress55.jpg (568.56 KB, 2976x3968 - viewed 472 times.)
Logged
peteracs
Administrator
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 4020


Peter Stokes


« Reply #5 on: December 01, 2021, 07:21:55 PM »

Hi Clifford

I will hunt out my spares.

Peter
Logged

Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600
Clifford
Sr. Member
****
Offline Offline

United Kingdom United Kingdom

Posts: 178


« Reply #6 on: December 01, 2021, 07:47:13 PM »

Much appreciated Peter
Logged
peteracs
Administrator
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 4020


Peter Stokes


« Reply #7 on: December 04, 2021, 12:56:46 PM »

Hi Clifford

I have 2 of these which are tatty, but work with good springs. They need a clean and some paint, but will be fine.

These are for the targa to top of the windscreen, not to the roll over hoop btw.

Peter


* 5283F6F3-DB5C-4134-9A32-1DBDE80104C5.jpeg (188.54 KB, 480x640 - viewed 457 times.)
Logged

Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600
Clifford
Sr. Member
****
Offline Offline

United Kingdom United Kingdom

Posts: 178


« Reply #8 on: December 04, 2021, 01:10:10 PM »

Hi Peter. Thank you. Let me check the springs on my targa and will get back to you.
C
Logged
peteracs
Administrator
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 4020


Peter Stokes


« Reply #9 on: December 04, 2021, 04:23:15 PM »

Hi Clifford

The targa to roll hoop latches do not have springs.

Peter
Logged

Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600
Clifford
Sr. Member
****
Offline Offline

United Kingdom United Kingdom

Posts: 178


« Reply #10 on: December 04, 2021, 06:08:18 PM »

I have sent you a private message Peter.
Logged
WestonE
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1774


« Reply #11 on: December 05, 2021, 03:44:45 PM »

Hi Clifford

The Spyder hood clips have a stepped down tongue which is different to the Targa ones. I spent an age getting and prepping a good pair of these including leather repair kit for the leather surfacing and JB Weld to fix cracking pads and of course sand blasting and painting. I literally cannot find my left over bits currently or I would have replied. If I find spare bits to the Hood Frame I will let you know.

Eric     
Logged
peteracs
Administrator
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 4020


Peter Stokes


« Reply #12 on: December 05, 2021, 04:01:33 PM »

Hi Eric

Good point, the latches which Clifford has shown are the front Targa ones, 2 of which I am sending him. As you say the rear hood ones are different as are the rear targa ones.

I do have some spare ones of these others in case required....

Peter
Logged

Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600
Clifford
Sr. Member
****
Offline Offline

United Kingdom United Kingdom

Posts: 178


« Reply #13 on: December 05, 2021, 04:06:09 PM »

Thank you for your input Eric. I would be surprised if you hadn't addressed some of these issues in your activities at some point.
Have you ever replaced the torsion springs on the latches? Alternatively do they stand a chance of surviving sand blasting?
I hope good progress is still being made on the Spyder
C
Logged
peteracs
Administrator
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 4020


Peter Stokes


« Reply #14 on: December 05, 2021, 04:15:48 PM »

Hi Clifford

I just checked on my spare rear hood latches and they do not have any springs on them. These are from a pre facelift, so maybe the later cars had modified latches?

Peter
Logged

Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600
WestonE
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1774


« Reply #15 on: December 06, 2021, 08:23:25 AM »

Hi Clifford

Yes they survived sand blasting OK. I had to Tank tape mask the leather of course. I remember pushing the roll pins out of some to make up a best set so maybe that will help you to use what Peter can supply.

Eric 
Logged
Clifford
Sr. Member
****
Offline Offline

United Kingdom United Kingdom

Posts: 178


« Reply #16 on: December 06, 2021, 10:08:31 AM »

Thank you for that information Eric. Always useful to have eyes wide open. The leather is shot on the frame I have and so I am going to have a go at making some new leather "pulls" from some bridle leather I have ordered from "fleabay"... Been watching too many episodes of "The Repair Shop" 😊
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SMFAds for Free Forums
Valid XHTML 1.0! Valid CSS!