Lancia Beta Forum
December 05, 2024, 09:06:59 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Looking for Lancia Beta parts: www.lanciabetaparts.co.uk
 
   Home   Help Contact Admin Search Calendar Gallery Articles Login Register  
Pages: [1]
  Print  
Author Topic: Rear caliper - caged thrust ball bearing(s)  (Read 3108 times)
0 Members and 1 Guest are viewing this topic.
mangocrazy
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1366


Graham Stewart


« on: November 29, 2020, 02:33:07 PM »

I'm in the middle of refurbishing a bunch of calipers, and I've found that a number of parts are in borderline condition and wonder if replacements are available. The part that concerns me most is the little caged thrust ball bearing assembly that sits inside the piston of the rear caliper. It consists of a pressed u-section brass cage with a number of 3mm ball bearings captive in the cage. Or not, as in my case. The overall size of the cage/bearing is, as best I can make out, 20mm o.d., 12.5mm i.d. and 3mm deep (i.e. the depth of the ball bearings). The whole affair seems a little flimsy and any over-zealous cleaning of the assembly can cause one or more of the ball bearings to pop out, never to be seen again.

Is this assembly available as a spare part (he said hopefully)? Looking in the S2 parts book, it's not even shown on the exploded caliper diagram, so I'm not hopeful. I've had a look through some of the online bearing suppliers and can find nothing remotely resembling this part.
Logged

1980 Lancia Beta Spider 2000 (S2FL)
2002 VW Transporter T4
2017 KTM Duke 690R
2008 Aprilia SL1000 Falco
1992 Ducati 888 SP3
1988 Honda VFR750F
1980 Yamaha RD350LC
mangocrazy
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1366


Graham Stewart


« Reply #1 on: November 29, 2020, 02:55:07 PM »

I believe I may have been guilty of over-thinking this.

Loose 3mm ball bearings in either hardened steel or 316 stainless are available for about £3 per 10 from suppliers such as Simplybearings. Gently pop the tired and corroded old bearins out and replace with shiny new ones. I reckon the version in 316 stainless woud be the best bet due to their superior corrosion resistance. Each race takes 11 balls, so for the pair of calipers I'm restoring, 3 packs will be needed.

Interested to hear others thoughts.
Logged

1980 Lancia Beta Spider 2000 (S2FL)
2002 VW Transporter T4
2017 KTM Duke 690R
2008 Aprilia SL1000 Falco
1992 Ducati 888 SP3
1988 Honda VFR750F
1980 Yamaha RD350LC
WestonE
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1776


« Reply #2 on: November 29, 2020, 05:46:10 PM »

Hi Graham

It sounds like a reasonable approach to me. These are not high speed bearings. Their purpose is for the piston to turn out with wear for handbrake self adjusting and of course back in when pads are changed.

Cheers

Eric
Logged
mangocrazy
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1366


Graham Stewart


« Reply #3 on: November 29, 2020, 06:56:47 PM »

Thanks for the confirmation, Eric. That was broadly my line of thinking as well. Most of the time the bearings will be static, so another reason to use stainless, I think.
Logged

1980 Lancia Beta Spider 2000 (S2FL)
2002 VW Transporter T4
2017 KTM Duke 690R
2008 Aprilia SL1000 Falco
1992 Ducati 888 SP3
1988 Honda VFR750F
1980 Yamaha RD350LC
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SMFAds for Free Forums
Valid XHTML 1.0! Valid CSS!