Lancia Beta Forum
December 19, 2018, 05:54:19 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: 2018 Calendar of Events: http://www.betaboyz.myzen.co.uk/forum/index.php?board=86.0
 
   Home   Help Contact Admin Search Calendar Gallery Donations Articles Login Register  
Pages: [1]
  Print  
Author Topic: 1981 Coupe rear suspension  (Read 424 times)
0 Members and 1 Guest are viewing this topic.
Paulk
Jr. Member
**
Offline Offline

United Kingdom United Kingdom

Posts: 11



« on: October 01, 2018, 08:39:07 PM »

Has anyone replaced their rear transverse link bushes, any advice, ? not sure if it's something that can be done without specialist tools.
Haynes advises taking them to your nearest Lancia dealership.!
I was in the process of changing the rear struts but the bolts were stuck fast to the bushes and need replacing.
They are the adjustable transverse links, not sure if that matters.?
Cheers Paul
Logged
Ammy
Sr. Member
****
Offline Offline

United Kingdom United Kingdom

Posts: 159


« Reply #1 on: October 02, 2018, 09:47:02 AM »

Take care with the anti-roll bar. It has to be restrained.  There is a special tool but I use a loop of rope tensioned by a length of wood which you "wind" up to stop the bar spreading.
Logged
HFStuart
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1585



« Reply #2 on: October 02, 2018, 12:11:19 PM »

It's pretty straightforward with both OE type bushes or with Betaboyz replacements.
Logged
Paulk
Jr. Member
**
Offline Offline

United Kingdom United Kingdom

Posts: 11



« Reply #3 on: October 29, 2018, 02:54:02 PM »

Changing the suspension has turned out to be a big job.
Had to cut, drill, heat, both long hub bolts out.!
I've ended up taking the whole bridge out now to get at the transverse links.
Now 'just' need to replace the bushes.!
Any advice out there,?



* IMG_1853.jpeg (272.24 KB, 756x1008 - viewed 59 times.)

* IMG_1854.jpeg (262.15 KB, 756x1008 - viewed 60 times.)
Logged
WestonE
Hero Member
*****
Offline Offline

United Kingdom United Kingdom

Posts: 751


« Reply #4 on: October 29, 2018, 04:39:15 PM »

From a quick look at the photos you have a badly bent adjustable link which will make the suspension crab. So post a parts wanted Ad for another rear subframe assembly for parts
A blow torch will remove the old rubber bushes so you can fit the Beta Boyz parts

Get the bolts, washers and bush holders on the adjustable links re-plated. I use Chingford plating. I had the frame and pressed arms sandblasted and powder coated and actually will use 4 adjustable links on my car.

Check very carefully for bent links or dangerously corroded links and use the best you can. It is easy when you have good parts prepped.

Good Luck

Eric

 
Logged
Orbital
Full Member
***
Offline Offline

United Kingdom United Kingdom

Posts: 50


« Reply #5 on: October 29, 2018, 05:24:28 PM »

Hi,

I had the very same issue as you ... couldn't find a way of replacing them Sad

I decided the best I could do was strip it down fully remove all the rust .. replace the bent arm and respray and re grease.

Came out pretty nicely.. Best advice I have for you.

 


* 20180901_122735.jpg (400.05 KB, 1292x969 - viewed 58 times.)
Logged
Orbital
Full Member
***
Offline Offline

United Kingdom United Kingdom

Posts: 50


« Reply #6 on: October 29, 2018, 05:24:46 PM »

.


* 20180902_114319.jpg (197.96 KB, 727x969 - viewed 63 times.)
Logged
Orbital
Full Member
***
Offline Offline

United Kingdom United Kingdom

Posts: 50


« Reply #7 on: October 29, 2018, 05:25:00 PM »

.


* 20181027_124113.jpg (689.97 KB, 1920x933 - viewed 57 times.)
Logged
Paulk
Jr. Member
**
Offline Offline

United Kingdom United Kingdom

Posts: 11



« Reply #8 on: October 29, 2018, 06:41:23 PM »

Thanks all for the advice, that's really helpful, I will let you know how I get on.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SMFAds for Free Forums
Valid XHTML 1.0! Valid CSS!