Lancia Beta Forum
March 19, 2019, 03:39:09 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Looking for Lancia Beta Parts
Lots of new items recently added
see: www.lanciabetaparts.co.uk
 
   Home   Help Contact Admin Search Calendar Gallery Articles Login Register  
Pages: 1 [2]
  Print  
Author Topic: Replacement fuel tank filler hose for Coupe  (Read 2520 times)
0 Members and 1 Guest are viewing this topic.
peteracs
Administrator
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1792



« Reply #20 on: January 31, 2018, 11:41:25 PM »

A bit of Googling will bring up various anecdotal reports, here is one such

http://forum.wscc.co.uk/forum/topic/98338-rubber-fuel-pipe/

I have read ones where the modern fuel mix has rotted pipes out within 6 months.

All the best

Peter
Logged

Beta Spyder S2 pre F/L 1600
Saab 9-3 1.9Tid Cabrio
peteracs
Administrator
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1792



« Reply #21 on: February 01, 2018, 09:58:41 AM »

Hi

Also an interesting article published back in 2009 which I came across.

https://www.hagerty.com/Articles-Videos/Articles/2009/09/02/Safe-at-the-Pump

Peter
Logged

Beta Spyder S2 pre F/L 1600
Saab 9-3 1.9Tid Cabrio
squiglyzigly
Sr. Member
****
Offline Offline

United Kingdom United Kingdom

Posts: 116



« Reply #22 on: March 04, 2018, 11:44:04 AM »

Re: fuel pipes. I recently discovered to my dismay that the alleged high quality silicon fuel lines, are in my opinion ‘not fit for purpose ‘. I found out the hard way when recently finishing the  restoration on my Beta coupe. I replaced every fuel line and hose on the car using original spec cotton braided hose in some places and silicon in others. The smell of fuel was overwhelming. After trial and error I discovered that Silicon hoses ‘breath’ regardless of the superior quality claims made by manufacturers and sellers. It was truly unbearable.
All silicon now replaced with quality gates fuel hoses and problem solved.

The other thing I noticed with your chassis rail problem is the lack of spacers between the fuel tank and the chassis. I’m pretty sure when I dropped my tank last year there where large thick spacers between the tank and the chassis. I think they are aimed at spreading the weight of the tank against a larger surface area on the chassis rail to prevent the problem you’ve just had of pulling the studs out of the chassis rail.
The spacers on my car where something like 4mm thick 20mm in diameter. (I’ve not measured this, just from memory).  Without them I think the rubber foam seal around the sender is pushing the tank down even harder against the mounting studs. 

Has anyone else got these spacers fitted.

All the best
Ian
Logged

Beta coupé VX (completed April 2017)
Beta Saloon 2000 s2 1979 (in progress)
Aprilia RSVR 2002
Aprilia Tuono R (130 rear wheel BHP) mad as a box of frogs
Alfa 159 sportwagon
LanciaDave
Jr. Member
**
Offline Offline

United States United States

Posts: 30


« Reply #23 on: February 02, 2019, 10:02:13 AM »

Yes. I have dropped the tank on Zagato (Spyder), Sedan, and at least 2 HPE's and all have had these extra thick washers/spacers underneath the angle brackets on either side that secure the tank.
Also thanks for the tip on the silicone fuel hose.
Has anyone found a source for the rubber filler hose? (that isn't $150 or too mickey moused)
Logged

Dave
Wilds of the Pacific NW, USA
77 HPE 1.8L manual steering
77 Sedan 2L FI
84 HPE Vx
76 Scorpion (Montecarlo) 2L w/dual 40DCNF
squiglyzigly
Sr. Member
****
Offline Offline

United Kingdom United Kingdom

Posts: 116



« Reply #24 on: February 05, 2019, 07:04:07 PM »

I found a gates fuel hose that was for another vehicle (sorry I can’t remember what it fitted) and cut it down. It was a quality rubber hose of the correct diameter and not based on silicon. It’s out there and made by Gates.
Logged

Beta coupé VX (completed April 2017)
Beta Saloon 2000 s2 1979 (in progress)
Aprilia RSVR 2002
Aprilia Tuono R (130 rear wheel BHP) mad as a box of frogs
Alfa 159 sportwagon
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SMFAds for Free Forums
Valid XHTML 1.0! Valid CSS!