Lancia Beta Forum
December 09, 2024, 09:21:32 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: 2024 Events Calendar http://www.betaboyz.myzen.co.uk/forum/index.php?board=92.0
Please feel free to add more.
 
   Home   Help Contact Admin Search Calendar Gallery Articles Login Register  
Pages: [1]
  Print  
Author Topic: Servo pipe clip and non return valve position  (Read 5632 times)
0 Members and 1 Guest are viewing this topic.
peteracs
Administrator
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 4034


Peter Stokes


« on: January 05, 2017, 08:32:07 AM »

Hi All

Quick questions on carb pre f/l S2 Spyder I am putting back together

1 - Can someone let me know where the servo pipe to the carb is supported. I see a clip in the parts book, and have looked at the Haynes which has one photo of HPE bay showing what I think is it attached to the battery tray, though unclear.

2 - my parts book implies the non return valve is situated near to the servo, but the photo in the Haynes manual has it located near the carb. Logically I would say the carb end, but where do others have it located?

Thanks

Peter
Logged

Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600
HFStuart
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1945



« Reply #1 on: January 07, 2017, 11:57:02 AM »

The clip is secured to the battery tray via a bolt on the side if the tray iirc. The non return valve is about 4" away from the carb - it's not at the servo end.
Logged
peteracs
Administrator
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 4034


Peter Stokes


« Reply #2 on: January 07, 2017, 01:37:23 PM »

The clip is secured to the battery tray via a bolt on the side if the tray iirc. The non return valve is about 4" away from the carb - it's not at the servo end.

Hi Stuart

Thanks, any chance you could have a quick look for me?

I can see a stud on the battery tray support bracket near the servo and two holes in the base of the battery tray which could take a bolt.

Peter
Logged

Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600
smithymc
Hero Member
*****
Offline Offline

Posts: 682


« Reply #3 on: January 07, 2017, 02:35:30 PM »

Might my coupe be the same? Happy to take pics if it might help.

Mark
Logged
HFStuart
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1945



« Reply #4 on: January 07, 2017, 03:52:53 PM »

Front offside of the battery tray - the clip bolts on underneath.

pm me your email ( sorry I've misplaced it) and I'll send a pic that just shows it.
Logged
Ammy
Sr. Member
****
Offline Offline

United Kingdom United Kingdom

Posts: 178


« Reply #5 on: January 08, 2017, 12:37:01 PM »

Are these any help ?


* BILD1250 (640x480) (300x225).jpg (103.79 KB, 300x225 - viewed 664 times.)

* BILD1251 (300x225).jpg (99.78 KB, 300x225 - viewed 828 times.)

* BILD1252 (300x225).jpg (105.14 KB, 300x225 - viewed 790 times.)
Logged
HFStuart
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1945



« Reply #6 on: January 08, 2017, 02:44:48 PM »

NB That's the tray with the extension piece for the rigid washer bottle   - the cars with the washer bag on the wing are slightly different
Logged
peteracs
Administrator
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 4034


Peter Stokes


« Reply #7 on: January 08, 2017, 03:28:28 PM »

Hi All

Thanks for the photos, I have all the info I need now, attached is the photo from Stuart of the pre f/l, so in the thread we have both styles of carb f/l and pre f/l, general consensus is the non return valve is up near the carb, not at the servo end which makes sense.

Peter


* Servo clip.jpg (438.3 KB, 2014x1283 - viewed 739 times.)
Logged

Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600
smithymc
Hero Member
*****
Offline Offline

Posts: 682


« Reply #8 on: January 08, 2017, 04:43:29 PM »

Great example of what a forum is for and what it does best.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SMFAds for Free Forums
Valid XHTML 1.0! Valid CSS!