Lancia Beta Forum
November 06, 2024, 12:42:06 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: 2024 Events Calendar http://www.betaboyz.myzen.co.uk/forum/index.php?board=92.0
Please feel free to add more.
 
   Home   Help Contact Admin Search Calendar Gallery Articles Login Register  
Pages: [1]
  Print  
Author Topic: Skimming Discs  (Read 4019 times)
0 Members and 1 Guest are viewing this topic.
cheeky monkey
Sr. Member
****
Offline Offline

Posts: 229


« on: July 03, 2016, 07:58:07 PM »

Hi
I'm going to change pads and bleed circuits so i was thinking of changing the discs. Has anyone had discs skimmed? or is it just better to fit new.?  I have some old stock discs that need cleaned up but it just got me thinking about trying to re-use what Ive got, so would be interested to know opinion/experience of the lathe route.
thanks
Graham
« Last Edit: July 03, 2016, 08:00:04 PM by cheeky monkey » Logged

Graham

1979 beta coupe 1300
peteracs
Administrator
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 3999


Peter Stokes


« Reply #1 on: July 03, 2016, 09:16:52 PM »

Hi Graham

No reason not to do this provided the end result is still within spec width wise. I am sure that someone can quote the disk tolerances, if not I can dig out the spec for you or may even be in Haynes?

Peter
Logged

Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600
rossocorsa
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 2403


« Reply #2 on: July 03, 2016, 10:17:41 PM »

If the discs are rough they will surely be close to min tolerance I'd fit new if they are available but if the old discs aren't too bad I'd keep them for future use in the event that discs become NLA. You may get away with a bit under tolerance on some discs as long as you don't let the pad wear get too bad.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SMFAds for Free Forums
Valid XHTML 1.0! Valid CSS!