Lancia Beta Forum
March 29, 2024, 06:12:17 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: NEC Restoration Show 22nd-24th March 2024
http://www.betaboyz.myzen.co.uk/forum/index.php?topic=5015.msg36852#msg36852
 
   Home   Help Contact Admin Search Calendar Gallery Articles Login Register  
Pages: [1]
  Print  
Author Topic: Testing a starter motor off the vehicle  (Read 4103 times)
0 Members and 1 Guest are viewing this topic.
mangocrazy
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1347


Graham Stewart


« on: March 11, 2016, 02:51:00 PM »

I'm laboriously getting a refurbished motor ready to take to France to substitute for the broken one, and I'm now ready to re-fit the starter motor. Before I do, are there any checks I can perform on the bench to see if the starter motor that was fitted to the engine (which has no known provenance) is viable or not? I was thinking of clamping it in the vice and then running leads from a battery to the +ve and -ve terminals. Is this wise or worthwhile? And how do I tell which starter motor terminal is +ve and which is -ve?

Given that it's in a particularly inaccessible area when the engine is in the car, I don't really want to find out I have a duffer when I come to start the motor for the first time.
Logged

1980 Lancia Beta Spider 2000 (S2FL)
2002 VW Transporter T4
2017 KTM Duke 690R
2008 Aprilia SL1000 Falco
1992 Ducati 888 SP3
1988 Honda VFR750F
1980 Yamaha RD350LC
gengis
Sr. Member
****
Offline Offline

Posts: 147


« Reply #1 on: March 11, 2016, 10:30:51 PM »

Yes that would be a worth while test.

Clamp starter in vice, connect +ve lead to the vacant terminal on the solenoid usually a M8 copper coloured stud.  Then connect the -ve lead to the casing of the starter, next use a smaller wire with croc clips from the +ve solenoid (heavy croc clip) to the spade terminal of the solenoid.  This will then energise the solenoid which will switch the main +ve current through to the starter making it spin if it's a good un.  This will also check that the solenoid is working correctly.  I would also give a drop of oil to the end bearings and the bendix shaft.

Please make sure the battery leads are kept isolated from each other during this process. THERE IS A LOT OF ENERGY IN A BATTERY.
Logged

1983 - Lancia Beta Coupe
1982 - Fiat 124 Spider
2012 - Alfa Romeo Mito
2011 - Fiat Fiorino
2006 - BMW F800st
lukasdeopalenica
Hero Member
*****
Offline Offline

Australia Australia

Posts: 497



« Reply #2 on: March 14, 2016, 08:34:01 AM »

I would suggest also checking condition of the starter brushes when you have it out. Access to them you will gain after removing of a back cover.
Logged

Lancia Beta HPE 2000i.e. '82 rosso corsa
SAAB 900i 16V Aero, '93 solid black
Subaru Outback 3.0R
Honda CB125 K6 '76 electric blue
Specialized Epic & Stumpjumper
mangocrazy
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1347


Graham Stewart


« Reply #3 on: March 15, 2016, 08:34:33 PM »

My starter motor solenoid has two contact posts, both with an M8 copper thread. The top one has no obvious connection (other than an internal one, I guess), the lower one has a lead attached which heads off inside the starter motor. Which one should I connect to the +ve terminal on the battery, and which one to the -ve? There is also a small lead with a spade terminal on it that is soldered on to a connection somewhere between the two M8 threads that is flopping about loose.

I tried connecting battery +ve to 'top' connection and -ve to 'bottom' connection and was met with deafening silence. Excuse my numptyness with electrics, but I don't want to do something silly and bugger it up. What should connect to what?
Logged

1980 Lancia Beta Spider 2000 (S2FL)
2002 VW Transporter T4
2017 KTM Duke 690R
2008 Aprilia SL1000 Falco
1992 Ducati 888 SP3
1988 Honda VFR750F
1980 Yamaha RD350LC
gengis
Sr. Member
****
Offline Offline

Posts: 147


« Reply #4 on: March 16, 2016, 06:12:13 PM »

Please see picture... -ve lead goes to the metal casing of the starter, +ve lead to the outboard heavy terminal of the solenoid.  The small lead clips onto the spade connection, then dab on to the heavy +ve lead to energise the solenoid switching the battery supply through to the starter motor itself.  Hope that helps.


* 003.JPG (186.32 KB, 640x480 - viewed 400 times.)
Logged

1983 - Lancia Beta Coupe
1982 - Fiat 124 Spider
2012 - Alfa Romeo Mito
2011 - Fiat Fiorino
2006 - BMW F800st
mangocrazy
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1347


Graham Stewart


« Reply #5 on: March 16, 2016, 07:51:38 PM »

Excellent stuff - many thanks! A picture is certainly worth a thousand words in this instance...!
Logged

1980 Lancia Beta Spider 2000 (S2FL)
2002 VW Transporter T4
2017 KTM Duke 690R
2008 Aprilia SL1000 Falco
1992 Ducati 888 SP3
1988 Honda VFR750F
1980 Yamaha RD350LC
mangocrazy
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1347


Graham Stewart


« Reply #6 on: March 16, 2016, 11:44:17 PM »

Yup, that works a treat. I was only using a 12Ah motorcycle battery for the test, but as soon as I touched the fly lead to the +ve solenoid terminal the starter whizzed around and flung the pinion down its shaft. Quite made me jump the first time I did it...

Tomorrow I'll inspect the brushes, but from what I've seen I'll be quite happy to bolt that starter motor back onto the engine.

Thanks again, gengis...  Grin
Logged

1980 Lancia Beta Spider 2000 (S2FL)
2002 VW Transporter T4
2017 KTM Duke 690R
2008 Aprilia SL1000 Falco
1992 Ducati 888 SP3
1988 Honda VFR750F
1980 Yamaha RD350LC
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SMFAds for Free Forums
Valid XHTML 1.0! Valid CSS!