Lancia Beta Forum
January 26, 2020, 10:51:01 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Looking for Lancia Beta Parts
Lots of new items recently added
see: www.lanciabetaparts.co.uk
 
   Home   Help Contact Admin Search Calendar Gallery Articles Login Register  
Pages: [1]
  Print  
Author Topic: Advise sought on Beta Spider seats  (Read 1475 times)
0 Members and 1 Guest are viewing this topic.
3cojones
Full Member
***
Offline Offline

United Kingdom United Kingdom

Posts: 55


Lancia Beta Spider 1981


« on: November 11, 2015, 02:56:34 AM »


Hi All,

I have just bought some secondhand Beta Spider seats and, having looked over them, have a couple of queries about them and would really appreciate some help :
 
1. Are the rear seat bases on the Spider (2000 F/L model) meant to have one or two locating lugs, or pins - each of mine have just one lug on the bottom of each base, although on one it's very weak, barely hanging on, so cannot be used.

2. How do I tighten the front bolt which holds the runner to the front seat - on these seats one runner is loose and I cannot get an Alen key to it for the runner being in the way (the rear bolt on the other hand is easily accessible).

Best regards,

Chris
Logged
Neil-yaj396
Legendary Member
******
Offline Offline

Posts: 1477


1979 1300 Coupe


« Reply #1 on: November 11, 2015, 08:38:36 AM »

Re 2; doesn't the runner move back and forward? A photo might help?
Logged
3cojones
Full Member
***
Offline Offline

United Kingdom United Kingdom

Posts: 55


Lancia Beta Spider 1981


« Reply #2 on: November 12, 2015, 02:39:11 AM »


Hi Neil,

Thanks for your post.  The problem is that there is no hole in the fixed upper part of the runner at the front end, and it's only the lower part that moves along within the fixed part (when the seats are removed). It's difficult to explain so I will take a pic on the weekend to help everyone out.

Regards,

Chris
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SMFAds for Free Forums
Valid XHTML 1.0! Valid CSS!