Lancia Beta Forum
March 28, 2024, 04:05:27 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: NEC Restoration Show 22nd-24th March 2024
http://www.betaboyz.myzen.co.uk/forum/index.php?topic=5015.msg36852#msg36852
 
   Home   Help Contact Admin Search Calendar Gallery Articles Login Register  
Pages: [1]
  Print  
Author Topic: Starter Motor Issues  (Read 12384 times)
0 Members and 1 Guest are viewing this topic.
betabuoy
Hero Member
*****
Offline Offline

United Kingdom United Kingdom

Posts: 303



« on: December 28, 2014, 07:30:44 PM »

Took the Coupe out for a Christmas Day blast but with a fully charged battery the starter was very sluggish not just at first start but also when warm; sometimes I just get a click from the solenoid.
Mine's had this issue for years and I've now got a collection of about three other starter motors in the garage from secondhand replacements.  The wiring is clean with a good earth.
Is there something else I should check before I go for another replacement?
Can anyone recommend a company for a decent reconditioning service?

Festive regards

Chris
Logged

1979 Beta Coupe S2FL (1st registered May 1983!)
1967 Morris Minor Traveller
1925 Austin 7 Chummy
MattNoVAT
Administrator
Legendary Member
******
Offline Offline

France France

Posts: 1830



« Reply #1 on: December 28, 2014, 07:53:47 PM »

I would have one reconned, I had two done before I left the UK.  Sounds like it's bendix drive has worn and the solenoid iffy is - I'll have a look if the address of the company who did mine is still on the box. (It was 2+ years ago)


Sent from my iPhone using Tapatalk
Logged

1981 2000 Coupe S2/FL
1976 1600 Coupe S1
2007 Ypsilon 1.3 Bi-Colori
rossocorsa
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 2373


« Reply #2 on: December 28, 2014, 08:27:45 PM »

I used to carry a metal rod and a big hammer in the boot for moments of starter crisis! I think the only answer us to refurbish, I always found they are at their worst when somewhere midway between cold and fully hot.
« Last Edit: December 29, 2014, 08:38:04 PM by rossocorsa » Logged
gengis
Sr. Member
****
Offline Offline

Posts: 147


« Reply #3 on: December 28, 2014, 10:55:56 PM »

Could be a bad battery...get a jump start, with decent leads.  That should tell you if the existing battery has the cranking capacity...cold weather kills suspect batteries.
Logged

1983 - Lancia Beta Coupe
1982 - Fiat 124 Spider
2012 - Alfa Romeo Mito
2011 - Fiat Fiorino
2006 - BMW F800st
betabuoy
Hero Member
*****
Offline Offline

United Kingdom United Kingdom

Posts: 303



« Reply #4 on: December 28, 2014, 11:22:20 PM »

Thanks so far. Battery is strong so it sounds like a recon is the next step. Standing by to hear of any recommended fixers.
Logged

1979 Beta Coupe S2FL (1st registered May 1983!)
1967 Morris Minor Traveller
1925 Austin 7 Chummy
Neil-yaj396
Legendary Member
******
Offline Offline

Posts: 1885


1979 1300 Coupe


« Reply #5 on: December 29, 2014, 08:13:51 AM »

You're in Yorkshire I think? Autoelectro on Leeds Road in Bradford are OK.
Logged
lukasdeopalenica
Hero Member
*****
Offline Offline

Australia Australia

Posts: 497



« Reply #6 on: December 29, 2014, 09:22:59 AM »

I was about to refurbish the starter motor with the same symptoms, but the reason was a weak battery. A new one with high starting amp rate solve the issue at all.
Before you start removing the starter check the voltage at the supplying lead (red ) to the coil. Often the voltage is just too low to engage the bendix due to poor condition of the ignition switch. The remedy may be supplying the voltage through an additional relay directly from the battery and not through the ignition switch.
« Last Edit: December 30, 2014, 09:00:41 AM by lukasdeopalenica » Logged

Lancia Beta HPE 2000i.e. '82 rosso corsa
SAAB 900i 16V Aero, '93 solid black
Subaru Outback 3.0R
Honda CB125 K6 '76 electric blue
Specialized Epic & Stumpjumper
peteracs
Administrator
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 3821


Peter Stokes


« Reply #7 on: December 29, 2014, 02:58:33 PM »

Hi Chris

I am with Lukas on this, make sure you check the voltage at the starter motor as there may be a loss on the way. Not checked it myself, but does the supply really go via the ignition switch? Sounds poor design, would suggest a relay makes real sense long term. As well as poor voltage potential at the motor, also has good potential for burning the switch out.

Peter
Logged

Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600
Neil-yaj396
Legendary Member
******
Offline Offline

Posts: 1885


1979 1300 Coupe


« Reply #8 on: December 29, 2014, 05:18:40 PM »

Hi Chris

I am with Lukas on this, make sure you check the voltage at the starter motor as there may be a loss on the way. Not checked it myself, but does the supply really go via the ignition switch? Sounds poor design, would suggest a relay makes real sense long term. As well as poor voltage potential at the motor, also has good potential for burning the switch out.

Peter

The full power doesn't go via the ignition switch, it goes via the solenoid, which is triggered by the switch. The solenoid is a sort of pre-electronic relay.

Never the less, it is worth checking that you are getting a full 12 volts at the solenoid. Be careful though, the full ampage of the battery should be there too!
Logged
betabuoy
Hero Member
*****
Offline Offline

United Kingdom United Kingdom

Posts: 303



« Reply #9 on: December 31, 2014, 02:56:41 PM »

Spent a bit of time with the test meter this morning and I'm happy that all of the appropriate voltages are there. I'll commit to getting one of my spare starter motors reconditioned and report back when complete.
Thanks for the inputs chaps and all the best for 2015.
Chris
Logged

1979 Beta Coupe S2FL (1st registered May 1983!)
1967 Morris Minor Traveller
1925 Austin 7 Chummy
Neil-yaj396
Legendary Member
******
Offline Offline

Posts: 1885


1979 1300 Coupe


« Reply #10 on: January 01, 2015, 10:11:10 AM »

You're in Yorkshire I think? Autoelectro on Leeds Road in Bradford are OK.

Chris

I'd forgotten that you are really at the opposite end of Yorkshire. I'm sure there will be someone decent around Teeside though.

Neil
Logged
betabuoy
Hero Member
*****
Offline Offline

United Kingdom United Kingdom

Posts: 303



« Reply #11 on: May 20, 2015, 10:22:05 AM »

Morning Chaps,

I thought I'd done a reasonable job of reconditioning one of the spare stater motors but, now fitted, whilst it turns beautifully it regularly fails to engage/remain engaged so I'm left with a spinning starter.

I understand that the pinion actuating lever is moved by the solenoid but why should it 'let go'?

Bottom line, will replacement of the solenoid on this motor fix the problem?

Chris
Logged

1979 Beta Coupe S2FL (1st registered May 1983!)
1967 Morris Minor Traveller
1925 Austin 7 Chummy
lukasdeopalenica
Hero Member
*****
Offline Offline

Australia Australia

Posts: 497



« Reply #12 on: May 20, 2015, 03:11:10 PM »

The coil is also acting as a contactor supplying the starter motor with electric power. The symptoms you mentioned suggest that the coil (6) itself is working properly, therefore I would suspect bendix (2) (the engaging element). Maybe it does need just cleaning and lubricating.  


* Automobile_starter_2.jpg (58.15 KB, 943x324 - viewed 552 times.)
« Last Edit: May 20, 2015, 03:13:42 PM by lukasdeopalenica » Logged

Lancia Beta HPE 2000i.e. '82 rosso corsa
SAAB 900i 16V Aero, '93 solid black
Subaru Outback 3.0R
Honda CB125 K6 '76 electric blue
Specialized Epic & Stumpjumper
betabuoy
Hero Member
*****
Offline Offline

United Kingdom United Kingdom

Posts: 303



« Reply #13 on: May 20, 2015, 09:43:12 PM »

Lucas

Thank you for your thoughts and Bendix theory. I took it all apart again but found all appeared to be free to move so it was difficult to know what to do next.

Having not traced the fault with that starter, I went back to my original unit (which often tended to 'click' but not turn over) and spent some time cleaning the commutator and brushes with petrol. It's fair to say that it was filthy to start and delightfully shiney when finished. Without long nose pliers to hand, there was a fair amount of swearing refitting the brushes against those fiddly springs but I'm pleased to say it works perfectly... for now!

I'm out in it tomorrow morning so fingers crossed for some consistency.

Chris
Logged

1979 Beta Coupe S2FL (1st registered May 1983!)
1967 Morris Minor Traveller
1925 Austin 7 Chummy
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SMFAds for Free Forums
Valid XHTML 1.0! Valid CSS!