Lancia Beta Forum
December 08, 2019, 07:17:33 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Beta Forum Key rings and car stickers now available here : www.lanciabetaforumshop.co.uk/
With all profits going to the forum, many thanks to Mark @ www.lanciabetaparts.co.uk
 
   Home   Help Contact Admin Search Calendar Gallery Articles Login Register  
Pages: 1 [2]
  Print  
Author Topic: Solution for front wishbone bushes  (Read 11785 times)
0 Members and 1 Guest are viewing this topic.
Per
Full Member
***
Offline Offline

Norway Norway

Posts: 93


« Reply #20 on: November 16, 2019, 10:31:02 PM »

I have just replaced the bushes in mine with OEM pattern bushes from ebay Italy. Perfect fit and all is well. Had to fabricate pullers to extract the old ones and pull the new ones in.
Logged
Neil-yaj396
Legendary Member
******
Offline Offline

Posts: 1467


1979 1300 Coupe


« Reply #21 on: November 18, 2019, 08:25:02 AM »

I'd be interested to see a photo of the puller you made up. I've heard of people having to burn the bushings out.
Logged
Per
Full Member
***
Offline Offline

Norway Norway

Posts: 93


« Reply #22 on: November 25, 2019, 09:00:07 PM »

Extracting:
The narrow ring fits where the bushing protudes into the vee, NB! I inverted it in the picture!!!
The large cylinder allows the wide outside end of the bushing to come into the cylinder without being pulled out of kilter and jamming in the wishbone.


* IMG_20191125_203310 (2).jpg (755.18 KB, 1762x1429 - viewed 26 times.)

* IMG_20191125_203335.jpg (651.71 KB, 1863x942 - viewed 23 times.)
« Last Edit: November 25, 2019, 09:03:18 PM by Per » Logged
Per
Full Member
***
Offline Offline

Norway Norway

Posts: 93


« Reply #23 on: November 25, 2019, 09:06:22 PM »

Inserting:
The short cylinder to the right sits outside the vee and fits onto the larger end of the bushing.


* IMG_20191125_203712.jpg (687.39 KB, 1754x1317 - viewed 24 times.)

* IMG_20191125_203740.jpg (663.43 KB, 1791x1080 - viewed 22 times.)
« Last Edit: November 25, 2019, 09:17:44 PM by Per » Logged
Per
Full Member
***
Offline Offline

Norway Norway

Posts: 93


« Reply #24 on: November 25, 2019, 09:21:35 PM »

And while I am at it, here is the very simple steering wheel puller I made. The two bolts fit in the steering wheel boss into ready made threaded holes made for the purpose.


* IMG_20191125_202226.jpg (725.77 KB, 1959x1758 - viewed 26 times.)

* IMG_20191125_202242.jpg (362.21 KB, 1477x1067 - viewed 25 times.)
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SMFAds for Free Forums
Valid XHTML 1.0! Valid CSS!