Lancia Beta Forum
October 14, 2024, 07:15:44 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Looking for Lancia Beta parts: www.lanciabetaparts.co.uk
 
   Home   Help Contact Admin Search Calendar Gallery Articles Login Register  
Pages: 1 [2]
  Print  
Author Topic: Solution for front wishbone bushes  (Read 21658 times)
0 Members and 1 Guest are viewing this topic.
Per
Sr. Member
****
Offline Offline

Norway Norway

Posts: 113


« Reply #20 on: November 16, 2019, 10:31:02 PM »

I have just replaced the bushes in mine with OEM pattern bushes from ebay Italy. Perfect fit and all is well. Had to fabricate pullers to extract the old ones and pull the new ones in.
Logged
Neil-yaj396
Legendary Member
******
Offline Offline

Posts: 1929


1979 1300 Coupe


« Reply #21 on: November 18, 2019, 08:25:02 AM »

I'd be interested to see a photo of the puller you made up. I've heard of people having to burn the bushings out.
Logged
Per
Sr. Member
****
Offline Offline

Norway Norway

Posts: 113


« Reply #22 on: November 25, 2019, 09:00:07 PM »

Extracting:
The narrow ring fits where the bushing protudes into the vee, NB! I inverted it in the picture!!!
The large cylinder allows the wide outside end of the bushing to come into the cylinder without being pulled out of kilter and jamming in the wishbone.


* IMG_20191125_203310 (2).jpg (755.18 KB, 1762x1429 - viewed 460 times.)

* IMG_20191125_203335.jpg (651.71 KB, 1863x942 - viewed 405 times.)
« Last Edit: November 25, 2019, 09:03:18 PM by Per » Logged
Per
Sr. Member
****
Offline Offline

Norway Norway

Posts: 113


« Reply #23 on: November 25, 2019, 09:06:22 PM »

Inserting:
The short cylinder to the right sits outside the vee and fits onto the larger end of the bushing.


* IMG_20191125_203712.jpg (687.39 KB, 1754x1317 - viewed 412 times.)

* IMG_20191125_203740.jpg (663.43 KB, 1791x1080 - viewed 404 times.)
« Last Edit: November 25, 2019, 09:17:44 PM by Per » Logged
Per
Sr. Member
****
Offline Offline

Norway Norway

Posts: 113


« Reply #24 on: November 25, 2019, 09:21:35 PM »

And while I am at it, here is the very simple steering wheel puller I made. The two bolts fit in the steering wheel boss into ready made threaded holes made for the purpose.


* IMG_20191125_202226.jpg (725.77 KB, 1959x1758 - viewed 419 times.)

* IMG_20191125_202242.jpg (362.21 KB, 1477x1067 - viewed 422 times.)
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SMFAds for Free Forums
Valid XHTML 1.0! Valid CSS!