Author Topic: Repro expansion tank  (Read 30643 times)

0 Members and 1 Guest are viewing this topic.

Offline Markwast

  • Jr. Member
  • **
  • Posts: 14
Repro expansion tank
« on: February 19, 2014, 02:48:56 PM »
Hi All,
Its been a while since i was on here last, looks like Ive got soooo much to catch up on, as well as posting about my projects.

Anyway, I dont like to try to sell parts via the forum but over the years new expansion tanks have been asked for many many times.

So this year,I finally decided to do it having found a key part that could be used.

Anyway today i collected the first prototype tank minus its add ons and here are some pics of it. You will have to appreciate this is not an exact copy.

You will first see the mounting points are thicker, this is due to the molding process but nothing longer bolts wont cure.

Also due shortly is a second set of under bonnet stickers, which include cambelt tensioner, head bolt and antifreeze.

Regards
Mark
LanciaBetaParts

Offline Thotos

  • Hero Member
  • *****
  • Posts: 394
  • Theo Kyriacou
    • Lancia Gamma Consortium
Re: Repro expansion tank
« Reply #1 on: February 21, 2014, 01:25:07 AM »
Looks good! When can we have one?
Theo Kyriacou

Offline Markwast

  • Jr. Member
  • **
  • Posts: 14
Re: Repro expansion tank
« Reply #2 on: February 21, 2014, 03:58:47 PM »
Hi Theo
First two should be ready in a week or so , will have to test it first, the first batch of 6 will be not long after that, ill have a better pic of finished item to put on here too.
Mark

Offline Les 442

  • Jr. Member
  • **
  • Posts: 18
Re: Repro expansion tank
« Reply #3 on: March 03, 2014, 10:01:17 AM »
They look great!
What sort of cost will they be selling for?

Offline Markwast

  • Jr. Member
  • **
  • Posts: 14
Re: Repro expansion tank
« Reply #4 on: March 07, 2014, 05:18:09 PM »
Hi Les, I have worked out costs and I am looking at £92.75 each. This is subject to change though.

Mark

Offline Thotos

  • Hero Member
  • *****
  • Posts: 394
  • Theo Kyriacou
    • Lancia Gamma Consortium
Re: Repro expansion tank
« Reply #5 on: March 14, 2014, 11:31:46 AM »
Not cheap but where else can you get one!  :-\  Apparently it's the same expansion tank on the Stratos so maybe you can sell a few at even a higher price  ;D  My second used replacement just started leaking from the centre support again so I'll definitely need one when they are available. I can always be your guinea-pig and test out the prototype as the Trevi is my daily driver (most days...)  ;)
Theo Kyriacou

Offline MattNoVAT

  • Legendary Member
  • ******
  • Posts: 1830
Re: Repro expansion tank
« Reply #6 on: March 14, 2014, 08:18:45 PM »
Mk 1 Fiat Ducato expansion is almost identical to the Beta and still available new.


Sent from my iPhone using Tapatalk
1981 2000 Coupe S2/FL
1976 1600 Coupe S1
2007 Ypsilon 1.3 Bi-Colori

Offline Thotos

  • Hero Member
  • *****
  • Posts: 394
  • Theo Kyriacou
    • Lancia Gamma Consortium
Re: Repro expansion tank
« Reply #7 on: March 15, 2014, 08:22:03 PM »
This one I presume?



Also fits Talbot Express and some Peugeot and Citroen vehicles.
Theo Kyriacou

Offline MattNoVAT

  • Legendary Member
  • ******
  • Posts: 1830
Repro expansion tank
« Reply #8 on: March 15, 2014, 08:34:58 PM »
Yup, that's the one, I bought a new one for €28.00

You have to modify the mounting bracket slightly, but that's very easy to do.


Sent from my iPhone using Tapatalk
1981 2000 Coupe S2/FL
1976 1600 Coupe S1
2007 Ypsilon 1.3 Bi-Colori

Offline Thotos

  • Hero Member
  • *****
  • Posts: 394
  • Theo Kyriacou
    • Lancia Gamma Consortium
Re: Repro expansion tank
« Reply #9 on: March 15, 2014, 10:38:47 PM »
Thanks, I just ordered a new one for £25 including postage  ;) ;D
Theo Kyriacou