Lancia Beta Forum
December 10, 2024, 02:34:13 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Looking for Lancia Beta parts: www.lanciabetaparts.co.uk
 
   Home   Help Contact Admin Search Calendar Gallery Articles Login Register  
Pages: [1]
  Print  
Author Topic: How to rebuild front seats - advice needed  (Read 5718 times)
0 Members and 1 Guest are viewing this topic.
Hawk
Hero Member
*****
Offline Offline

England England

Posts: 448



« on: April 30, 2013, 12:40:23 PM »

After the best part of 2 years of serious looking (and a bit more browsing!) I have finally acquired a set of seats for my Spyder in really good condition.

The only problem being that they are split into pieces.  My first task is to recover / attach the seat pads to the frames but after that I'm not really sure how the seats go together.

Does anyone have an exploded view of the seats? 

Failing which, I'll dismantle the ones I've got and see how it all works.  Can't imagine it's difficult but any hints / tips are appreciated.   
Logged
St Volumex
Owner of RetroPart
Jr. Member
**
Offline Offline

United Kingdom United Kingdom

Posts: 16



« Reply #1 on: May 02, 2013, 08:35:53 AM »

Here you go.  Smiley

* Betaparts_S1 seat parts.pdf (241.9 KB - downloaded 365 times.)
Logged

Guy McDougall
www.facebook.com/RetroPart
Rare Parts for Rare Machines
Appia Coupé S3 (Rosina), Appia Berlina S3 (La Giaconda), Fulvia 1.3S 5 spd coupé (Tigger, belongs to Carol), Beta Spyder S2 (Vivaldi), Montecarlo Spyder S2, HPE VX (Pugsly) etc. etc.
peteracs
Administrator
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 4034


Peter Stokes


« Reply #2 on: May 02, 2013, 09:35:34 AM »

Hi Guy

That is for the saloon from the heading on the page? What is required is the S2 f/l Spyder seats. Also not sure if what was asked for was how the internals of the seats go together?

Peter
Logged

Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600
Hawk
Hero Member
*****
Offline Offline

England England

Posts: 448



« Reply #3 on: May 02, 2013, 11:41:53 AM »

Hi Guy

thanks for the info but I'm after a bit more detail.  My seats are completely split down (covers off, foam separate, not connected to bases, springs removed, box of bits etc etc.) and I'm after detail of how it all goes back together so the recline / folding mechanisms fit together.

As mentioned, I can pull my existing seats apart but any help would be good.   
Logged
Hawk
Hero Member
*****
Offline Offline

England England

Posts: 448



« Reply #4 on: May 02, 2013, 11:44:32 AM »

And yes, specific info on the S2 front seats would be great Smiley
Logged
St Volumex
Owner of RetroPart
Jr. Member
**
Offline Offline

United Kingdom United Kingdom

Posts: 16



« Reply #5 on: May 02, 2013, 11:58:47 AM »

Hi, the S1 parts book is the only documentation I have readily available for Beta seats.

The S2 seats shown are essentially mechanically the same as S1, and short of dismantling the seats from my own S2 spyder...  Grin
Logged

Guy McDougall
www.facebook.com/RetroPart
Rare Parts for Rare Machines
Appia Coupé S3 (Rosina), Appia Berlina S3 (La Giaconda), Fulvia 1.3S 5 spd coupé (Tigger, belongs to Carol), Beta Spyder S2 (Vivaldi), Montecarlo Spyder S2, HPE VX (Pugsly) etc. etc.
peteracs
Administrator
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 4034


Peter Stokes


« Reply #6 on: May 02, 2013, 12:59:45 PM »

Hi All

I do not think the parts book has a better explosion than that already posted for the S1 seats. If you need the same for the S2 seats, let me now, but will not any further detail, ie will be the external metalwork to the seats, not the internal construction.

Peter
Logged

Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600
Hawk
Hero Member
*****
Offline Offline

England England

Posts: 448



« Reply #7 on: May 02, 2013, 05:10:23 PM »

Hi All

I do not think the parts book has a better explosion than that already posted for the S1 seats. If you need the same for the S2 seats, let me now, but will not any further detail, ie will be the external metalwork to the seats, not the internal construction.

Peter

Thanks Peter - no need.  From what I can see I may be missing some parts anyway so dismantling / canibalising my existing seats may the the way to go. 
Logged
rossocorsa
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 2412


« Reply #8 on: May 03, 2013, 08:44:02 AM »

if you get chance photograph the strip down then post it here so that others will have a point of reference
Logged
St Volumex
Owner of RetroPart
Jr. Member
**
Offline Offline

United Kingdom United Kingdom

Posts: 16



« Reply #9 on: May 03, 2013, 11:01:19 AM »

Hi All

I do not think the parts book has a better explosion than that already posted for the S1 seats. If you need the same for the S2 seats, let me now, but will not any further detail, ie will be the external metalwork to the seats, not the internal construction.

Peter

Hi Peter,

The prospect of getting a Beta S2 Parts book is interesting.  Where could I get one please?

Kind regards,
Guy
Logged

Guy McDougall
www.facebook.com/RetroPart
Rare Parts for Rare Machines
Appia Coupé S3 (Rosina), Appia Berlina S3 (La Giaconda), Fulvia 1.3S 5 spd coupé (Tigger, belongs to Carol), Beta Spyder S2 (Vivaldi), Montecarlo Spyder S2, HPE VX (Pugsly) etc. etc.
Hawk
Hero Member
*****
Offline Offline

England England

Posts: 448



« Reply #10 on: May 03, 2013, 12:28:11 PM »

if you get chance photograph the strip down then post it here so that others will have a point of reference

Good idea.  I've already pulled some of the seats together but still have more to do - I'll get the camera out
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SMFAds for Free Forums
Valid XHTML 1.0! Valid CSS!