Lancia Beta Forum
December 10, 2024, 12:08:34 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Looking for Lancia Beta parts: www.lanciabetaparts.co.uk
 
   Home   Help Contact Admin Search Calendar Gallery Articles Login Register  
Pages: [1]
  Print  
Author Topic: Rear brake adjustement  (Read 3422 times)
0 Members and 1 Guest are viewing this topic.
archigraphe
Sr. Member
****
Offline Offline

Posts: 131


« on: November 08, 2012, 03:43:57 PM »

Hi to all

Is there a way to adjust the brakes the car bitter placed on stands, I think including the rear brake controller.

Or should I adopt the conventional technique, emptied and car wheel in contact with the ground?

On the road my handbrake is totally ineffective in tight corners ...
Logged
lukasdeopalenica
Hero Member
*****
Offline Offline

Australia Australia

Posts: 497



« Reply #1 on: November 08, 2012, 09:40:59 PM »

On the road my handbrake is totally ineffective in tight corners ...
I always thought a handbrake is for parking use  Wink
Logged

Lancia Beta HPE 2000i.e. '82 rosso corsa
SAAB 900i 16V Aero, '93 solid black
Subaru Outback 3.0R
Honda CB125 K6 '76 electric blue
Specialized Epic & Stumpjumper
VXdeMayo
Hero Member
*****
Offline Offline

United Kingdom United Kingdom

Posts: 374



« Reply #2 on: November 08, 2012, 09:57:30 PM »

If it's any thing like my Fiat 124 Spider, it's totally ineffective especially for parking use!
I always find a brick quite a useful tool.
Best,
Chas. Smiley
Logged

"Baldric - I have a cunning plan" (Oh - ah, maybe not)!
rossocorsa
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 2412


« Reply #3 on: November 08, 2012, 10:04:53 PM »

Hand brake is self adjusting however from what I remember if you over adjust  the cable it will not adjust correctly. Worth a try to slacken the cable off then drive down the road using heavy braking both forwards and back wards then readjust the cable and see if it is better. As regards the proportioning valve I guess if you want a certain balance it could be down to trial and error, otherwise I would follow the workshop manual
Logged
archigraphe
Sr. Member
****
Offline Offline

Posts: 131


« Reply #4 on: November 08, 2012, 10:31:55 PM »

If it's any thing like my Fiat 124 Spider, it's totally ineffective especially for parking use!
I always find a brick quite a useful tool.
Best,
Chas. Smiley

It's exactly the same answer I would say to lukasdeopalenica

Effectively a non conventionnal use for this Handbrake...

But all time I tried this handbrake...... I heard my copilot says.... "useles, you don't have handbrake.... Roll Eyes Roll Eyes", so I take this tigh corner, with the rear gear, and with the first and again the rear and could go in the good direction....... Really frustating thing.... Undecided Undecided

The car is on stand for this week end, and I intend to success find this handbrake.... I think grease the cable mechanisme on the rear caliper, and as says rossocorsa maybe follow the light worshop manual...



Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SMFAds for Free Forums
Valid XHTML 1.0! Valid CSS!