Lancia Beta Forum
November 01, 2024, 12:27:34 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Looking for Lancia Beta parts: www.lanciabetaparts.co.uk
 
   Home   Help Contact Admin Search Calendar Gallery Articles Login Register  
Pages: [1]
  Print  
Author Topic: Datr 34 Carb rebuild and faulty fuel pump.  (Read 3576 times)
0 Members and 1 Guest are viewing this topic.
Kevo
Full Member
***
Offline Offline

England England

Posts: 69



« on: November 09, 2016, 06:07:57 PM »

Well I went to move the car to a better position to finally do a rebuild on the carb but it would not start, traced this to the fuel pump not working Sad. So I started to remove the carb and pump but when I removed the air cleaner there was some oil around the filter and the top of the carb.
Any ideas? I'm assuming it's the fact that I've only done about 100 miles this year.

Where's the best place to get a decent pump from?

With the carb rebuild kit I also bought a new GASKET BLOCK but this is about 3mm thicker, will this be a problem?

Many thanks Kev.
« Last Edit: November 11, 2016, 12:30:45 AM by Kevo » Logged

1979 Beta Coupe 1600
1972 Triumph TR6 Pi
2005 BMW Z4 Roadster
peteracs
Administrator
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 3998


Peter Stokes


« Reply #1 on: November 09, 2016, 06:16:15 PM »

Hi

Plenty on Ebay at little money, a few are old stock but new, no idea if there are perishable inner parts, but maybe worth a go at the prices (~£20)

Peter
Logged

Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600
simplydelboy
Sr. Member
****
Offline Offline

Posts: 111



« Reply #2 on: November 09, 2016, 08:02:08 PM »

I just bought a fuel pump from Betaboyz, about £45 from memory. Went on perfectly and runs fine. You know what you're buying with Mark.
Logged

1977 Beta Spyder 2000
1983 Beta HPE 2000ie

Previously. Beta Sedan, Spiders, HPEs, Fulvias, Gammas, Flavias, Thema 832
Kevo
Full Member
***
Offline Offline

England England

Posts: 69



« Reply #3 on: November 11, 2016, 12:34:42 AM »

Thanks guys, will probably go for the betaboyz one.

Does any one have an idea as to fitting the 3mm thicker gasket insulater block, will it cause any issues?

Cheers Kev.
Logged

1979 Beta Coupe 1600
1972 Triumph TR6 Pi
2005 BMW Z4 Roadster
Neil-yaj396
Legendary Member
******
Offline Offline

Posts: 1933


1979 1300 Coupe


« Reply #4 on: November 11, 2016, 08:15:24 AM »

Is it the block between carb and air filter? If so these sometimes get compressed over the years, so your new one is probably right.
Logged
Kevo
Full Member
***
Offline Offline

England England

Posts: 69



« Reply #5 on: November 11, 2016, 09:18:54 AM »

Is it the block between carb and air filter? If so these sometimes get compressed over the years, so your new one is probably right.
Hi Neil
No it's the insulated black plastic block which goes between the manifold and the carburettor.
Old one is 4mm new one is 7mm inc both gaskets.

Cheers Kev.
Logged

1979 Beta Coupe 1600
1972 Triumph TR6 Pi
2005 BMW Z4 Roadster
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SMFAds for Free Forums
Valid XHTML 1.0! Valid CSS!