Lancia Beta Forum

Technical stuff => Engine => Topic started by: hongkongphooey on June 14, 2010, 11:55:44 AM



Title: valve stem oil seals....
Post by: hongkongphooey on June 14, 2010, 11:55:44 AM
for a 2litre engine.

Does anyone know of a supplier for these please?

Thanks


Title: Re: valve stem oil seals....
Post by: WestonE on June 14, 2010, 05:06:56 PM
Guy Croft carries them in stock and they normally come with head gasket sets.

Eric


Title: Re: valve stem oil seals....
Post by: hongkongphooey on June 14, 2010, 07:39:35 PM
Cheers....

Yeah, the ones that came with my head set,i've managed to mash a few of them up.

I've just looked on the GC site and he only accepts cheques for orders under 20.....I can't remember the last time i used a cheque,so i've no idea where my cheque book would be if i even still have one.

I'll keep looking i guess.


Title: Re: valve stem oil seals....
Post by: HFStuart on June 14, 2010, 08:56:38 PM
Guy takes payment by card ...treat yourself to a set of his headbolts too.


Title: Re: valve stem oil seals....
Post by: hongkongphooey on June 14, 2010, 09:37:11 PM
Guy takes payment by card ...treat yourself to a set of his headbolts too.

Stem seals are only 6 quid.....i'm not falling into his evil trap and spending more money just so i can pay by 21st century payment methods.  ;D


Title: Re: valve stem oil seals....
Post by: Neil-yaj396 on June 15, 2010, 10:01:39 AM
I think I have some. How many do you need? PM me with your address. A small donation to the site will be fine payment wise.

Neil


Title: Re: valve stem oil seals....
Post by: MattNoVAT on June 15, 2010, 02:39:16 PM
I have some spares too - so you may be able to cobble a full set together.

Same as Neil - a small donation to the site is all thats asked.

Let us know how many you need...


Title: Re: valve stem oil seals....
Post by: hongkongphooey on June 15, 2010, 05:05:32 PM
Thanks guys.....

Although i've now ordered a set for an x1/9 hoping they'll fit,so i'll let you know if they don't. I'm thinking i'll need 8 as i think the ones i got with my head set are wrong,that's why i mashed them up. They're awfully tight!


Title: Re: valve stem oil seals....
Post by: lanciamad on June 15, 2010, 06:05:25 PM
Quote
treat yourself to a set of his headbolts too.
I have done, there ridiculously expensive, and ok look brilliant quality  ;) as well as the "special" GC washers to go with them, just need to build an engine to use them now :D


Title: Re: valve stem oil seals....
Post by: hongkongphooey on June 16, 2010, 02:53:28 PM
The x1/9 ones fit if anyone's interested......they went on much easier then the ones supplied with the head set i bought.