|
Title: Bottom Water Rail O ring Size Post by: spyder_resto on May 15, 2024, 06:48:12 AM Hi Everyone
Quick question. Do you know what the size of the O ring for the bottom rail is please? PLanning to change water pump and wanted to change that at the same time. Many thanks in advance 2.0 Beta Spyder - 1979 Si Title: Re: Bottom Water Rail O ring Size Post by: SanRemo78 on May 15, 2024, 09:29:23 AM I think it's a simple gasket that should come with the water pump.
Title: Re: Bottom Water Rail O ring Size Post by: spyder_resto on May 15, 2024, 11:20:34 AM I have the gasket that comes with the Water pump. Haynes manual states that there is an O ring that should be replaced when you reconnect the lower water rail to the water pump.
It was this O ring size that I was after. Thanks Si Title: Re: Bottom Water Rail O ring Size Post by: Nigel on May 16, 2024, 09:05:14 PM Indeed there is an O ring. I did mine some 4 years ago and I think the pump
I bought had the ring included. I suggest you get a box of assorted rings. You'll more than likely find a match. Or disassemble first and measure. Nigel Title: Re: Bottom Water Rail O ring Size Post by: smithymc on May 17, 2024, 08:31:48 AM Or pm me - I've got some (could only buy a bag of rings from the engineering supplies place) from when I did mine.
Happy to pop a couple in the post. Mark Title: Re: Bottom Water Rail O ring Size Post by: spyder_resto on May 17, 2024, 09:30:46 AM Hi Mark,
Much appreciated. I have a set of various O rings and hoping one of those will do the job. dismantling tomorrow and if stuck will pm you. Thank you Si |