Lancia Beta Forum

Technical stuff => Part Number Requests => Topic started by: squiglyzigly on November 28, 2019, 10:07:36 PM



Title: Gearbox 2nd gear synchromesh components
Post by: squiglyzigly on November 28, 2019, 10:07:36 PM
Can someone help me with diagrams and part numbers for synchromesh components to overhaul 2nd gear. I think the parts where the same throughout the years but I stand corrected if the fiche suggests otherwise.

I know the components havenít been available for years but I want to keep an eye out in case some old stock surfaces somewhere. 

Cheers
Ian


Title: Re: Gearbox 2nd gear synchromesh components
Post by: rossocorsa on November 29, 2019, 12:15:14 AM
I can copy the pics from any of the parts books, what series is yours specifically?

Not wishing to teach you to suck eggs but have you tried changing the oil with the correct non EP oil?


Title: Re: Gearbox 2nd gear synchromesh components
Post by: squiglyzigly on November 29, 2019, 08:51:18 PM
The gearbox I intend to overhaul sooner or later is from a 2.0 injection.

I havenít driven it yet to know of itís functional performance but Iíd like to see if I can track down spares as I will undoubtedly want to rebuild it at some point seeing as the car Iím building is going to be a daily runner. 2nd gear syncro is always the first to tire. So I want to get ahead of the game and start collecting spares.

Oil wise I always use Red line MT non slip. My VX works well on it hot and cold.

Thanks again
Ian


Title: Re: Gearbox 2nd gear synchromesh components
Post by: rossocorsa on November 29, 2019, 09:54:26 PM
I'll see what I can do, too much on my mind at the moment so apologies in advance if I forget. I'll need to photograph the microfiche. I think (only think) I might have some synchro rings that are Lancia but application possibly unknown (might not be in original bags) if I ever come across then when rummaging I'll let you know.


Title: Re: Gearbox 2nd gear synchromesh components
Post by: Neil-yaj396 on November 30, 2019, 04:04:51 AM
2nd gear has always been ok on my Betas up to 80k miles. By then the linkage and bushes will be shot, and these are usually the real problem. So if they are renewed, and the gearbox gets a quality oil change you may find that you don't need to rebuild it.


Title: Re: Gearbox 2nd gear synchromesh components
Post by: squiglyzigly on May 03, 2020, 10:45:48 AM
I think I may have found the synchro baulk rings here.

Can anyone check if the part number is the same through early and late 2.0L gearboxes please.
Iím looking to rebuild my late 2.0 i.e. gearbox and just want to make sure this is the correct ring.

Thanks
Ian


Title: Re: Gearbox 2nd gear synchromesh components
Post by: rossocorsa on May 03, 2020, 05:52:26 PM
https://www.amazon.co.uk/photos/share/kiqHu7UUZkT5dbMtjTfTbLauVkBqHwZOHs5v1STe6qN (https://www.amazon.co.uk/photos/share/kiqHu7UUZkT5dbMtjTfTbLauVkBqHwZOHs5v1STe6qN)

If this doesn't include the info you need let me know and I'll have another look


Title: Re: Gearbox 2nd gear synchromesh components
Post by: squiglyzigly on May 03, 2020, 10:39:17 PM
Spot on.

Very grateful for this.

Ian