|
Title: Anyone have tool for undoing old style wheel bearing ring? Post by: peteracs on October 05, 2015, 10:35:08 AM Hi All
I know that there is a tool around for hire for undoing the later and common ring, but looking at mine it is different and I wondered if anyone has a tool to undo it or is it a case of cold chisel and hammer and replace? Photo of the ring in situ below Peter Title: Re: Anyone have tool for undoing old style wheel bearing ring? Post by: HFStuart on October 05, 2015, 01:08:10 PM I've never seen a tool to fit one of them.
I notice though that the there are 8 notches so in theory you could cut a square piece of thickish plate to fit and either broach a square hole for a breaker bar or weld a big nut to it. Drill and split with a cold chisel is going to be faster though. Title: Re: Anyone have tool for undoing old style wheel bearing ring? Post by: peteracs on October 05, 2015, 01:22:44 PM Hi
Thanks, yes, not a lot of purchase available on the ring unlike (and presumably why they changed it) the later one. I am hoping the later one will just fit..... Peter |