And So It Begins....

[Nigel]

Guy,
Just after you've used the tank sealer, I suggest that you blow
through all the pipework, especially the small vent tube/s,
for obvious reasons!

Good luck, excellent progress,

Cheers
Nigel

[smithymc]

And grease the fuel sender mount 'floating' ring thingy and tape/grease the studs before you put the sealer in - ask me how I know...........

Mark

[SanRemo78]

Thanks for the tips Mark & Nigel - I was planning on walking into the Frost Restorations warehouse with the fuel tank to ask about the likelyhood of fuel line blockages. I had planned on blocking the filler pipe and float sender holes with a cork bung from a beer maker with a rubber glove to give a good seal whilst the goop gets sloshed around. I hadn't considered that it might be able to find the threads on the sender ring though so great tip. I'll see if I can find a can of compressed air to clear the small lines once treated though, great tip!

Won't be happening for a week or so though, away from Friday and still got half the top surface and sides to clear of corrosion which may be covering/finding pinholes soon.
Guy